W. Zhao, Y. Chen, L. G. Shen and A. Y. Yi, “Investigation of the Refractive Index Distribution in Precision Compression Glass Molding by Use of 3D Tomography,” Measurement Science and Technology, Vol. 20, No. 5, 2009, p. 055109. doi:10.1088/0957-0233/20/5/055109

has been cited by the following article:

• TITLE: Reducing Refractive Index Variations in Compression Molded Lenses by Annealing

  AUTHORS: Bo Tao, Lianguan Shen, Allen Yi, Mujun Li, Jian Zhou

  KEYWORDS: Refractive Index; Mach-Zehnder Interferometer; Optical; Annealing; Compression Molding

  JOURNAL NAME: Optics and Photonics Journal, Vol.3 No.2B, July 18, 2013

  ABSTRACT: Compression molding of glass optics is gradually becoming a viable fabrication technique for high precision optical lenses. However, refractive index variation was observed in compression molded glass lenses, which would contribute to image quality degradation. In this research, annealing experiments were applied to control the refractive index variation in molded glass lenses. The refractive index variations pre and post annealing experiment in molded lenses were measured by an experiment setup based on Mach-Zehnder interferometer. The experimental results showed that the refractive index variation can be controlled providing that a proper cooling process is applied during cooling.