W. Shizhong, J. Zhu and L. Xu, “Investigation on Wear Behaviors of High-Vanadium High-Speed Steel Compared with High-Chromium Cast Iron under Rolling Contact Condition,” Materials Science and Engineering: A, Vol. 434, No. 1-2, 2006, pp. 641-648.

has been cited by the following article:

• TITLE: On the Comparison of Microstructure Characteristics and Mechanical Properties of High Chromium White Iron with the Hadfield Austenitic Manganese Steel

  AUTHORS: Johnson O. Agunsoye, Talabi S. Isaac, Agbeleye A. Abiona

  KEYWORDS: High Chromium White Iron; Hadfield Steel; Microstructure; Wear

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.1, January 28, 2013

  ABSTRACT: In this study, high chromium white iron (HC-Wi) alloy and the Hadfield steel were studied. The microstructure of this high-chromium iron was studied using Metallurgical optical microscopy (OM) and compared to the Hadfield steel. The hardness and unnotched charpy impact strength of the HC-Wi alloy and Hadfield steel were examined at ambient temperature in the as-cast and heat-treated conditions. A pin-on-disc test at linear speed of 1.18 m/s and a 10 N normal load was employed to evaluate the wear behavior of both steel samples. Microstructural results showed that varying the carbon level in HC-Wi alloys can affect the chromium carbide morphology and its distribution in the austenite matrix which leads to considerable changes of the mechanical properties. Abrasion test showed that HC-Wi alloys have superior wear resistance, about three times of the Hadfield steel.