A. Mandal, R. Maiti, M. Chakraborty, B. S. Murty, “Effect of TiB2 Particles on Aging Response of Al-4Cu Alloy,” Material Science and Engineering: A, Vol. 386, No. 1-2, 2004, pp. 296-300. doi:10.1016/j.msea.2004.07.026

has been cited by the following article:

• TITLE: Wear Predictions of Metal Matrix Composite in Presence of Greasing Material

  AUTHORS: Shivaji V. Gawal, Vinod B. Tungikar

  KEYWORDS: Centrifugal Casting; Al-4Cu-xTiB2; Mathematical Regression Analysis

  JOURNAL NAME: Energy and Power Engineering, Vol.4 No.3, May 14, 2012

  ABSTRACT: Aluminum-copper titanium di-boride [Al-4Cu-xTiB2] composite (x = 1%, 1.75%, 2.5%) is prepared successfully by centrifugal casting. Samples pin of diameter 8 mm, 10 mm, & 12 mm are prepared with help of special purpose die. An experimental parameter analysis is obtained for various load and speed combinations on pinon wear disc testing machine. A larger volume fraction of particles can be attained near the wear surface via centrifugal casting. The volume fraction of the heavier titanium di-boride is controlled by inertial forces upon centrifugal processing the semisolid composite. Mathematical Regression Analysis is carried out to calculate wear. Greasy material facilitates heat transfer on the counter side material. Comparative study facilitates wear predictions of Al-4Cu-xTiB2 metal matrix composite for various practical applications.