Wang, “Design and Implementation of Timing Acquisition in IEEE 802.11a Wireless LANs,” Proceedings of the 2003 Joint Conference of the 4th International Conference on Information, Communications and Signal Processing, Singapore City, 15-18 December 2003, pp. 554-558.

has been cited by the following article:

• TITLE: Software Defined Radio Prototyping with Visual C++ Express and Code Composer Studio

  AUTHORS: Sverre Wichlund

  KEYWORDS: SDR; OFDM; Waveform; IEEE802.11; DSK6713; Visual C++ Express; Baseband Processing

  JOURNAL NAME: Wireless Engineering and Technology, Vol.3 No.2, April 28, 2012

  ABSTRACT: The primary goal of this project was educational: to demonstrate Software Defined Radio based prototyping using Visual C++ Express and Code Composer Studio. More specifically an IEEE802.11a Phy [1] compliant baseband processor was written in C++ and a radio link demonstrated “live” using a standard PCand the DSK6713 kit from Spectrum Digital [2] for baseband processing at the receiver and transmitter side respectively. To reduce costs without loss of educational value (the algorithms remains the same), the bandwidth was scaled down from 20MHz to 6 kHz to be able to utilize cheap narrowband COTS RF frontends operating at an intermediate frequency of only 12 kHz at the transmitter and receiver sides. This was easily achieved by just reducing the OFDM symbol rate by a suitable factor. The development process is described in detail, emphasizing development tricks to facilitate debugging of this kind of complex baseband processing. For educational purposes some other simpler waveforms was implemented as well.