Yan, H., Zhang, X.-H., Wu, J.-M., et al. (2008) The Use of CTAB to Improve the Crystallinity and Dispersibility of Ultrafine Magnesium Hydroxide by Hydrothermal Route. Powder Technology, 188, 128-132. https://doi.org/10.1016/j.powtec.2008.04.024

has been cited by the following article:

• TITLE: Optimization of Preparation Conditions of Nanometer Magnesium Hydroxide

  AUTHORS: Yang Zhan, Qingping Hu, Xueyong Zhou

  KEYWORDS: Nanometer Magnesium Hydroxide, Magnesium Chloride, Sodium Hydroxide, Positive Drip Method

  JOURNAL NAME: Open Access Library Journal, Vol.10 No.12, December 28, 2023

  ABSTRACT: Nanometer magnesium hydroxide was prepared by positive drop method using magnesium chloride hexahydrate as raw material and sodium hydroxide as precipitant, and its preparation process was optimized. The results of single factor experiments show that the optimized process conditions are as follows: reaction temperature 40°C, stirring speed 900 rpm, initial concentration of magnesium chloride C = 1 mol/L, concentration ratio of magnesium chloride to sodium hydroxide solution n (Mg2+): n (OH-) = 1:2, reaction time T = 60 min, drop acceleration of sodium hydroxide solution 2 ml/min.