Farahbod, F. (2021) Investigation of Thermal Performance of a New Drill Equipped with Heat Pipe and Nanofluid. Case Studies in Thermal Engineering, 27, Article ID: 101316.
https://doi.org/10.1016/j.csite.2021.101316

has been cited by the following article:

• TITLE: Investigating the Performance of the Coagulation Process When Using a Combination of Zinc Oxide Nanoparticles and Ferric Polysulfate

  AUTHORS: Akbar Darvishi, Aryan Abbasi, Farshad Farahbod

  KEYWORDS: Nano Polymer, Coagulant, Ply Ferric, ZnOPFS, pH

  JOURNAL NAME: Advances in Nanoparticles, Vol.12 No.2, May 15, 2023

  ABSTRACT: In this article, a new type of coagulant material has been investigated and the performance of the coagulation process using this type of coagulant was evaluated. This new type is a combination of zinc oxide nanoparticles and polyferric sulfate (ZnOPFS). The structure of zinc oxide nanoparticles was determined by spectroscopic, X-ray and electron microscopy methods, and based on this, it was determined that ZnOPFS is a complex and mixed compound that is mainly composed of zinc oxide nanoparticles and ferric sulfate. The effects of Zn/Fe (Zn/Fe) molar ratio and aging (time) on acidity and zeta potential were also evaluated using a specific method. The obtained results showed that in the simultaneous deposition process, zinc ions can prevent the formation of polyferric acid coagulation and subsequently improve the stability of ZnOPFS.