Metikoš-Huković, M., Babić, R., Škugor, I. and Grubač, Z. (2011) Copper-Nickel Alloys Modified with Thin Surface Films: Corrosion Behaviour in the Presence of Chloride Ions. Corrosion Science, 53, 347-352.
https://doi.org/10.1016/j.corsci.2010.09.041

has been cited by the following article:

• TITLE: Wear Evaluation of Copper-Nickel-Aluminum Alloys under Extreme Conditions

  AUTHORS: Rene Guardian, Isai Rosales-Cadena, Constancio Diaz-Reyes, Juan Antonio Ruiz-Ochoa

  KEYWORDS: Copper Nickel Alloys, Hardness, Mechanical Properties, Heat Treatment

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.1, December 30, 2022

  ABSTRACT: Cu-Ni-Al alloys at different concentrations were obtained using a high frequency induction melting unit, keeping a balance in the nominal compositions. Light alloys are important to be used in industrial applications. Aluminum additions result in a positive hardness increment of the ternary alloys in comparison with the binary Cu-Ni alloys. Generalized wear mechanisms of the alloys with low aluminum content are basically type abrasive, while samples with 5 and 10 at.% Al present an oxidative-adhesive wear mechanism. Wear results have indicated that aluminum addition affects positively the wear resistance, mainly in samples with high aluminum content product of the creation during the test of different oxides corresponding to the elements present in the alloys.