Ren, S.J., Charles, J., Wang, X.C., Nie, F.X., Romero, C., Neti, S., Zheng, Y., Hoenig, S., Chen, C., Cao, F., Bonner, R. and Pearlman, H. (2017) Corrosion Testing of Metals in Contact with Calcium Chloride Hexahydrate Used for Thermal Energy Storage. Material and Corrosion, 68, 1046-1056.
https://doi.org/10.1002/maco.201709432

has been cited by the following article:

• TITLE: Chemical Heat Storage Using an SiC Honeycomb Packed with CaCl2 Powder

  AUTHORS: Atsuhiro Ichinose, Kazuki Kuwata, Takehiro Esaki, Takayuki Matsuda, Noriyuki Kobayashi

  KEYWORDS: Chemical Heat Storage, CaCl2, Heat Discharging, Simulation

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.8 No.11, November 17, 2020

  ABSTRACT: Chemical heat storage is a promising technology for improving thermal energy efficiency. In this study, CaCl2 and H2O were selected as a reaction system for utilization of low-grade exhaust heat that is cooler than 200°C. Heat discharging and charging were conducted through the CaCl2 hydration reaction. A silicon carbide honeycomb was adopted to improve heat transfer in the CaCl2 packed bed. The heat storage, condenser, and evaporator temperature were set at 150°C, 30°C and 90°C respectively. Repeated trials and experiments are time consuming for optimizing design of the equipment. Therefore, in this research, we constructed a simulation that can predict the performance of the device. A numerical simulation model was utilized in preparation for the design of the heat storage module. The consistency of both the simulation and the experimental results was confirmed by comparing them.