Albert, M.M., Mougel, E. and Zoulatian, A. (2000) Infleuence of Some Parameters of Wood-Cement Preparatiom on Compressive Strength and Dimensional Variation. Proceeding of the International Inorganic-Bonded Wood and Fiber Composites Conference, 7, University of Idaho, US.

has been cited by the following article:

• TITLE: A Developed Material as a Nuclear Radiation Shield for Personal Wearing

  AUTHORS: Samir Ushah El-Kameesy, Wagdy Ahmed Kansouh, Elsayed Salama, Mabrouk Kamel El-Mansy, Sara Ahmed El-Khateeb, Riad Mostafa Megahid

  KEYWORDS: Neutron Shielding, Nuclear Weapon, Fission Bomb, Thermal Neutrons, Californium Source

  JOURNAL NAME: Journal of Applied Mathematics and Physics, Vol.5 No.3, March 9, 2017

  ABSTRACT: A new composite of silicone rubber and boric acid was developed to be used as a personal wearing for protection from nuclear radiation. The capability of this material for absorbing thermal neutrons of different intensities followed by a detonation of nuclear weapon has been investigated. This investigation was performed by using californium-252 neutron source of like fission spectrum. The thermal neutron flux was measured behind different thicknesses of the developed material using a BF3 detector. Two positions of measurements were performed; at position near the detonation where the intensity of thermal neutron flux is low and at position far from the detonation where the intensity of thermal neutron is high. For both cases, the contribution of total thermal, initial incident and new produced thermal neutron fluxes are measured. The obtained results indicated that, addition of boron with concentration of about 17% to the silicon rubber tends to decrease the flux by more than 70%.