Liu, Y., Teng, B.T., Guo, X.H., Li, Y., Chang, J., Tian, L., Hao, X., Wang, Y., Xiang, H.W., Xu, Y.Y. and Li, Y.W. (2007) Effect of Reaction Conditions on the Catalytic Performance of Fe-Mn Catalyst for Fischer-Tropsch Synthesis. Journal of Molecular Catalysis A, 272, 182-190.
https://doi.org/10.1016/j.molcata.2007.03.046

has been cited by the following article:

• TITLE: An Introductive Study about CO2 Hydrogenation into Hydrocarbons Using Iron Catalysts

  AUTHORS: Wensheng Ning, Chunhua Chen, Tianqi Wang, Yangfu Jin, Xiezhen Yang

  KEYWORDS: CO2 Hydrogenation, Hydrocarbon Synthesis, Iron Catalyst

  JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.7 No.1, December 21, 2016

  ABSTRACT: CO2 hydrogenation reaction was performed on precipitated iron catalysts which were promoted by Si, Zn, K and Cu. The optimum SiO2 content in the catalysts is about 15 wt% relative to Fe2O3 mass. With reaction temperature raised, CO2 conversion is increased continually, but CO and CH4 selectivity only fluctuate in a narrow range which is beneficial to the synthesis of C2+ hydrocarbons. Two kinds of catalyst filling constitution were experimentally compared in order to increase the yield of C5+ hydrocarbons.