Xu, Y., Li, K. and Zhang, M. (2007) Lignin Precipitation on the Pulp Fibers in the Ethanol-Based Organosolv Pulping. Colloids Surface A: Physiochemical and Engineering Aspects, 301, 255-263.
http://dx.doi.org/10.1016/j.colsurfa.2006.12.078

has been cited by the following article:

• TITLE: Effects of Ethanol Addition and Biological Pretreatment on Soda Pulping of Eulaliopsis binata

  AUTHORS: Archana Gautam, Amit Kumar, Dharm Dutt

  KEYWORDS: Ethanol-Soda Pulping, Bio-Pulping, Eulaliopsis binata, Schizophyllum commune, Fibre Morphology

  JOURNAL NAME: Journal of Biomaterials and Nanobiotechnology, Vol.7 No.2, April 20, 2016

  ABSTRACT: Morphological characteristics and proximate chemical analysis of E. binata showed it as a suitable raw material for writing and printing grade paper. Maximum pulp yield (43.58%) of kappa number 17.38 with 0.9% screening rejects was obtained at 12% of active alkali (as Na2O) pulping temperature 130°C, cooking time 120 min and solid to liquor ratio 1:4. During bio-soda pulping of E. binata, pulp yield decreased slightly while pulp brightness, tensile index, burst index and double fold numbers were improved by 4.1%, 24.94%, 14.03% and 48.45% respectively compared to soda pulping. During ethanol-soda pulping of E. binata, pulp yield, pulp brightness, tensile index, burst index and double fold numbers were improved by 3.9%, 6.6%, 32.18%, 35.40% and 77.31% respectively compared to soda pulping.