Z.-H. Meng and Q. Liu, “Determination of Degradation Products of Nerve Agents in Human Serum by Solid Phase Extraction using Molecularly Imprinted Polymer,” Analytica Chimica Acta, Vol. 435, No. 1, 2001, pp. 121-127. doi:10.1016/S0003-2670(01)00858-3

has been cited by the following article:

• TITLE: Imprinted Polymer Inclusion Membrane Based Potentiometric Sensor for Determination and Quantification of Diethyl Chlorophosphate in Natural Waters

  AUTHORS: Varada Vishnuvardhan, Yakkala Kalyan, Krishnapillai Padmajakumari Prathish, Battala Gangadhar, Yadamari Tharakeswar, Talasila Prasada Rao, Gurijala Ramakrishna Naidu

  KEYWORDS: Sensor, Imprinted Polymer Inclusion Membrane, Potentiometry, Diethyl Chlorophosphate, Natural Waters

  JOURNAL NAME: American Journal of Analytical Chemistry, Vol.2 No.3, July 8, 2011

  ABSTRACT: Biomimetic potentiometric sensor for the determination of diethyl chlorophosphate was developed using im- printed polymer inclusion membrane strategy. Semi-covalent imprinted and non-imprinted polymer particles were synthesized and found that non-imprinted polymer inclusion membrane was unstable in contrast to im- printed polymer inclusion membrane in determination and quantification of diethyl chlorophosphate. Im- printed polymer inclusion membrane based sensor found to be pH dependant with a 5 min equilibrium response time at pH = 10.5 and linearly responds to diethyl chlorophosphate in the concentration range of 1 × 10–9 to 1 × 10–4 and 1 × 10–4 to 1 × 10–1 mol●L–9 with a detection limit of 1 × 10–9 mol●L–1 (0.17 ppb). It was found that diethyl chlorophosphate response was selective against various selected interferents like pinacolyl methylphosphonate, dimethyl methyl phosphonate, methylphosphonic acid, Phorate and 2, 4-D. The devel- oped sensor was found to be stable for 3 months and can be reusable more than 30 times without loosing sensitivity. The developed sensor was successfully applied for the determination of diethyl chlorophosphate in natural waters.