Camilleri, J. (2011) Characterization and Hydration Kinetics of Tricalcium Silicate Cement for Use a Dental Biomaterial. Dental Materials, 27, 836-844.
http://dx.doi.org/10.1016/j.dental.2011.04.010

has been cited by the following article:

• TITLE: Synthesis of CaO-SiO2 Compounds Using Materials Extracted from Industrial Wastes

  AUTHORS: Nobuaki Yamaguchi, Yoshiko Masuda, Yoshishige Yamada, Hideaki Narusawa, Cho Han-Cheol, Yukimichi Tamaki, Takashi Miyazaki

  KEYWORDS: Recycling, Calcium Silicate, Diatomite, Alginate Impression Material, Calcium Hydroxide

  JOURNAL NAME: Open Journal of Inorganic Non-metallic Materials, Vol.5 No.1, December 23, 2014

  ABSTRACT: Mineral trioxide aggregate (MTA) cement is an attractive material in endodontic dentistry. The purpose of this study was to produce calcium silicate, which is a major component of MTA, from waste materials. A dental alginate impression gel and used chalks were selected and mixed in a suitable ratio (Code: EXP). As a control, CaCO3 and a commercial diatomite were used (Code: CON). Each powder was heated to 850。C and 1000。C, and then kneaded with water. TG-DTA, compressive tests, SEM observations, elemental mapping analyses, and XRD analyses were performed. TG-DTA indicated that weight reduction of CaCO3 started at 600。C, and it completely decomposed on heating at 850。C. The strength was affected by the temperature. After heating, CaCO3 was transformed into CaO and/or Ca2SiO4, and Ca(OH)2 was formed by mixing with water. There were no differences between EXP and CON. These data suggested that recycled wastes might be promising MTA sources.