Crecraft, D.I. (1967) The Measurement of Applied and Residual Stresses in Metals Using Ultrasonic Waves. Journal of Sound and Vibration, 5, 173-192.
http://dx.doi.org/10.1016/0022-460X(67)90186-1

has been cited by the following article:

• TITLE: Measurement of Surface SH-Wave Velocities Generated on the Surface of Japanese Cypress Column

  AUTHORS: Masumi Hasegawa, Junji Matsumura

  KEYWORDS: Surface SH-Wave, Moisture Content, Acoustoelasticity, Velocity, Wood

  JOURNAL NAME: Open Journal of Acoustics, Vol.4 No.4, November 21, 2014

  ABSTRACT: Polyetherimide resin wedge transducers were used to generate a shear wave that was obliquely incident relative to the surface of a Japanese cypress column for measuring the surface SH-wave velocity. As the inter-transducer distance increased, the propagation time increased and the am-plitude became smaller. The propagation time and the amplitude were significantly correlated with the inter-transducer distance. The SH-wave velocity ranged from 1270 m/s to 1496 m/s. Surface SH-wave velocity was lower in the central part of the column and higher in the outer part. Velocity was negatively correlated with moisture content at 1% of significance level. These results suggest the accomplishment of the first target for applying the surface SH-wave acoustoelastic technique to nondestructive evaluation of drying stress in wood.