Chen, S.-Z., Lin, J.-H.C. and Ju, C.-P. (2003) Effect of Aluminum Content on Tribological Behavior of a Cu-Fe-C Based Friction Material Sliding against FC30 Cast Iron. Materials Transactions, 44, 787-793.
http://dx.doi.org/10.2320/matertrans.44.787

has been cited by the following article:

• TITLE: The Effect of Copper Addition on the Mechanical and Wear Properties of Grey Cast Iron

  AUTHORS: J. O. Agunsoye, S. A. Bello, S. B. Hassan, R. G. Adeyemo, J. M. Odii

  KEYWORDS: Wear Resistance, Linear Curve Fitting, Toughness, Enhancement, Development

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.5, September 24, 2014

  ABSTRACT: An alloy of cast iron and copper (Fe-Cu) has been developed using a stir cast process. The compo-sitional, microstructural characterization and wear property of the developed Fe-Cu alloy were carried out with the aids of X-ray diffractometer, scanning electron microscope (SEM) and pin on Disc machine. The mechanical properties such as hardness and impact energy were investigated. Wear linear equations were generated with the aids of MATLAB linear fitting. The results revealed that the presence of copper (99% pure) in the melt of grey cast iron inhibited the formation of cementite. However, the impact energy of the grey cast iron increased with %weight (wt) of copper addition. Hence, the hardness and wear resistance of the developed Fe-Cu alloy were sacrificed. Hence, the developed Fe-Cu alloy is an excellent material which can be used in the vibration damping application especially in the shock absorber.