Carriazo, J.G., Guelou, E., Barrault, J., Tatibouet, J.M. and Moreno, S. (2003) Catalytic Wet Peroxide Oxidation of Phenol over Al-Cu or Al-Fe Modified. Applied Clay Science, 22, 303-308.
http://dx.doi.org/10.1016/S0169-1317(03)00124-8

has been cited by the following article:

• TITLE: Urban Wastewater Treatment by Adsorption of Organic Matters on Modified Bentonite by (Iron-Aluminum)

  AUTHORS: Meçabih Zohra, Jérôme Rose, Daniel Borschneck

  KEYWORDS: Adsorption, Urban Wastewater, Bentonite Clay, Isotherm Models

  JOURNAL NAME: Journal of Encapsulation and Adsorption Sciences, Vol.4 No.3, September 4, 2014

  ABSTRACT: In this research, the natural bentonite clay (from Maghnia, western Algeria) was purified (Na+- montmorillonite, CEC = 91 meq/100 g), noted (puri.bent) and modified with mixed hydroxy-Fe-Al (FeAl-PILC). The purified bentonite clay and FeAl-PILC were heated at 383 K for 2 hr and characte-rized by the chemical analyses data, XRD, and N2 adsorption to 77 K techniques. Puri.bent and FeAl-PILC were applied to fix the organic matter (OM) present in urban wastewater from the city of Sidi Bel-Abbes (western Algeria). The adsorption of organic matter was followed by spectro-photometry at 470 nm, and the adsorption data were a good fit with Freundlich isotherm for pu-ri.bent but for FeA-lPILC, were well fit by Elovitch isotherm model. The maximum adsorption ca-pacity (qm) was 571.6 mg/g for puri.bent and 1120.69 mg/g for FeAl-PLC. The degree of OM removal was 67% for puri.bent and 97% for FeAl-PILC. FeAl-PILC can be considered as a promising adsorbent for the removal of OM from wastewater.