S. Mekic, C. A. Ulven, I. S. Akhatov, E. Jerke and E. Kerr-Anderson, “Evaluation of In-Plane and Transverse Permeability of Flax Preformsfor Biocomposite Materials,” Journal of Biobased Materials and Bioenergy, Vol. 3, No. 2, 2009, pp. 156-164.
http://dx.doi.org/10.1166/jbmb.2009.1020

has been cited by the following article:

• TITLE: Processability of Biobased Thermoset Resins and Flax Fibres Reinforcements Using Vacuum Assisted Resin Transfer Moulding

  AUTHORS: J. Schuster, Q. Govignon, S. Bickerton

  KEYWORDS: Biocomposites; Rheological Properties; Mechanical Properties; Resin Transfer Moulding (RTM)

  JOURNAL NAME: Open Journal of Composite Materials, Vol.4 No.1, January 7, 2014

  ABSTRACT: Biocomposite panels consisting of biobased thermoset resins (EP, PU, UP, and tannin) and flax fibre reinforcements were produced using the vacuum assisted resin transfer moulding process. Panels based on a conventional chemical-based resin matrix were also produced, and investigated comparatively. Rheometric analyses were performed to evaluate the suitability of these resins for liquid composite moulding. Tensile, shear, and impactbending tests have been carried out to assess the quality and mechanical performance of manufactured laminates. The impregnation quality was assessed by means of ultrasonic-C-scanning and microscopy. It turned out that the properties of the biobased composite panels made of biobased epoxy resin and a biobased UP-resin from the company Nuplex in New Zealand were onlay slightly inferior to those produced with a conventional epoxy resin. A biobased PU-resin from the company USSC in the USA developed voids during curing. A tannin-based resin containing of formaldehyde was not processable.