C. Wannek, W. Lehnert and J. Mergel, “Membrane Electrode Assemblies for High-Temperature Polymer Elec-trolyte Fuel Cells Based on Poly(2,5-Benzimidazole) Membranes with Phosphoric Acid Impregnation via the Catalyst Layers,” Journal of Power Sources, Vol. 192, No. 2, 2009, pp. 258-266. http://dx.doi.org/10.1016/j.jpowsour.2009.03.051

has been cited by the following article:

• TITLE: Performance Investigation of Membrane Electrode Assemblies for High Temperature Proton Exchange Membrane Fuel Cell

  AUTHORS: Huaneng Su, Sivakumar Pasupathi, Bernard Bladergroen, Vladimir Linkov, Bruno G. Pollet

  KEYWORDS: High Temperature Proton Exchange Membrane Fuel Cell; ABPBI (Poly(2, 5-Benzimidazole)); Polymer Binders; Gas Diffusion Electrode; Membrane Electrode Assembly

  JOURNAL NAME: Journal of Power and Energy Engineering, Vol.1 No.5, December 25, 2013

  ABSTRACT: Different types of ABPBI (poly(2,5-benzimidazole)) membranes and polymer binders were evaluated to investigate the performance of MEAs for high temperature proton exchange membrane fuel cell (HT-PEMFC). The properties of the prepared MEAs were evaluated and analyzed by polarization curve, electrochemistry impedance spectroscopy (EIS), cyclic voltammetry (CV) and durability test. The results showed that MEA with modified ABPBI membrane (AM) has satisfactory performance and durability for fuel cell application. Compare to conventional PBI or Nafion binders, polytetrafluoroethylene (PTFE) and polyvinylidene difluoride (PVDF) are more attractive as binders in the catalyst layer (CL) of gas diffusion electrode (GDE) for HT-PEMFC.