E. Y. K. Ng and Z. Y. Liu, “Prediction of Unobstructed Flow for Co-Rotating Multi-Disk Drive in an Enclosure,” International Journal for Numerical Methods in Fluids, Vol. 35, No. 5, March 2001, pp. 519-531. doi:10.1002/ 1097-0363(20010315)35:5<519::AID-FLD98>3.0.CO;2- F

has been cited by the following article:

• TITLE: Heat Source Analysis of Hard Disk Drives with Different Wall Conditions using Infrared System

  AUTHORS: Eddie Yin-Kwee Ng, Wan Kee Ng, Shaoyong Liu

  KEYWORDS: Heat Transfer; Infrared; Hard Disk Drive; Heat Source Analysis; Heat Sink Conditions

  JOURNAL NAME: Engineering, Vol.3 No.1, January 29, 2011

  ABSTRACT: Increasing performance parameters of hard disk drive (HDD) such as higher capacity and faster data access speed with decreasing physical size make HDD more susceptible to thermal effects. Contact temperature measurement using thermocouple is not suitable for the rotating platter of HDD. Heat analysis using simulation software requires accurate initial parameter setting such as thermal (initial & boundary) conditions of certain regions. Temperature measurement using infrared (IR) system avoids these limitations; it is non-contact, responsive and does not require initial parameter setting. Thermal pattern distribution can be studied from the thermal images. However, emissivity of the target has to be known and calibration of the system is essential for accurate temperature reading. This paper showed that temperature within the HDD increases with ambient temperature and time, but the thermal distribution pattern in the HDD was not affected by different ambient temperatures. Three wall boundary conditions were conducted to study the thermal distribution pattern in the HDD. A solution was then proposed based on the results obtained from the experiments to improve the heat transfer rate and steady state temperature, and reduce the detrimental effects from high thermal generation in future prototypes. Another important finding was that the averaged temperature of the head cap was generally higher compared to that of the disk, as the spindle motor is the primary heat source within the HDD. Heat source analysis of HDD with IR system allows designers to have better visibility of the temperature generated in different components of the HDD. Proper cooling may enhance disk life as well as ensure the stability and integrity of the system.