Mohan B., Rajadurai A., Satyanarayana K.G., 2004, “Electric discharge machining of Al–SiC metal matrix composites using rotary tube electrode”. Journal of Materials Processing Technology, 153–154, 978–985.

has been cited by the following article:

• TITLE: MRR Improvement in Sinking Electrical Discharge Machining: A Review

  AUTHORS: Kuldeep Ojha, R. K. Garg, K. K. Singh

  KEYWORDS: EDM, parameters, MRR, dielectric, powder, variations, milling, ultrasonic, performance

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.8, August 20, 2010

  ABSTRACT: Electrical discharge machining (EDM) is one of the earliest non-traditional machining processes. EDM process is based on thermoelectric energy between the workpiece and an electrode. Material removal rate (MRR) is an important performance measure in EDM process. Since long, EDM researchers have explored a number of ways to improve and optimize the MRR including some unique experimental concepts that depart from the traditional EDM sparking phenomenon. Despite a range of different approaches, all the research work in this area shares the same objectives of achieving more efficient material removal coupled with a reduction in tool wear and improved surface quality. The paper reports research on EDM relating to improvement in MRR along with some insight into mechanism of material removal. In the end of the paper scope for future research work has been outlined.