Huang, L., He, Y., Jin, L., Hou, X., Miao, L. and Lü, C. (2018) Fabrication and Properties of Graphene Oxide/Sulfonated Polyethersulfone Layer-by-Layer Assembled Polyester Fiber Composite Proton Exchange Membranes. Chemical Research in Chinese Universities, 34, 318-325.
https://doi.org/10.1007/s40242-018-7313-0

has been cited by the following article:

• TITLE: One-Step Fabrication of Methylthiazole-Functionalized Anion Exchange Membranes for Diffusion Dialysis

  AUTHORS: Hong Hu, Wei Song

  KEYWORDS: Diffusion Dialysis, Anion Exchange Membrane, Acid Recovery, Methylthiazole

  JOURNAL NAME: Open Journal of Physical Chemistry, Vol.8 No.4, November 30, 2018

  ABSTRACT: Anion exchange membranesusing brominated poly(2,6-dimethyl-1,4-phenylene oxide) (BPPO) as starting material were prepared from one-step functionalization by 4-methylthiazole (MTz). The obtain membranes with high thermal stability and mechanical strength showed satisfied diffusion dialysis performance for acid recovery. Specifically, when the optimal membrane was evaluated to recover acid from the simulated iron polishing waste solution (1.0 mol·L-1 FeCl2 + 0.2 mol·L-1 HCl), its acid diffusion coefficient (UH+) was 0.019 m h-1 and separation factor was 40.1 at 25°C, both of these two parameters are much higher than the corresponding values of the commercial DF-120 membrane, suggesting the great potential in the practical application for acid recovery.