Neklydov, I.M. (2011) Features of Formation of Dissimilar Metal Joints in Hot Roll Welding in Vacuum. The Paton Welding Journal. Neklydov, I.M., Borts, B.V. and Tkachenko, V.I. (2011) Features of Formation of Dissimilar Metal Joints in Hot Roll Welding in Vacuum. The Paton Welding Journal, 27, 32-37.

has been cited by the following article:

• TITLE: Changes in the Structure and Properties of the Cu-Pb Composites Interface Jointed in the Solid Phase

  AUTHORS: Boris V. Borts, Aleksander A. Parkhomenko, Igor A. Vorobiev, Aleksander A. Lopata, Vitaliy A. Aleksandrov, Michael P. Domnich

  KEYWORDS: Solid State Joint, Cu-Pb Composite, Deformation, Mass Transfer, Interface

  JOURNAL NAME: Open Journal of Metal, Vol.8 No.3, September 30, 2018

  ABSTRACT: Research of structure and properties of Cu-Pb-Cu composite interface, obtained by technology of pack rolling of the pair of mutually insoluble metals, was performed using the methods of metallography, micro- and nano-hardness, mechanical tests, energy-dispersion elementary analyses. The work was aimed at the analyses of possible mechanical mechanisms of mass-transfer, determining the hardness of metal joint in conditions of absence of inter-diffusion. It was shown that different intensity of mass transfer of copper and lead takes place through the composite interface, which corresponds to the results obtained on the other system of dissimilar materials—copper-niobium. Qualitative explanation of these patterns was offered on the basis of more intensive plastic flow of fusible compound of the composite in conditions of roll-bond joining.