Li, H., Yin, Z., He, Q., Li, H., Huang, X., Lu, G., Fam, D.W.H., Tok, A.L.Y., Zhang, Q. and Zhang, H. (2012) Fabrication of Single- and Multilayer MoS₂ Film-Based Filed-Effect Transistors for Sensing NO at Room Temperature. Small, 8, 63-67.
https://doi.org/10.1002/smll.201101016

has been cited by the following article:

• TITLE: The High Surface Ratio Micro-MoS2 Grain Composed of MoS2 Nanosheet Prepared with One-Step Hydrothermal Synthesis

  AUTHORS: Guangtong Zhou, Xiangbin Zeng, Wenzhao Wang, Yishuo Hu, Sue Xu, Shaoxiong Wu, Yang Zeng, Wen Jing, Tingting Ren, Zhenyu Guo, Pengfei Xu, Haoran Li, Yushu Tang

  KEYWORDS: Micro-MoS2 Grain, Hydrothermal, One-Step Reaction, Nanosheet

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.3, May 17, 2018

  ABSTRACT: Micro molybdenum disulfide was prepared with one-step hydrothermal method; the influence of reactant concentration and temperature on the surface ratio of micro-MoS2 grain was investigated. Raman spectroscopy (Raman), X-ray diffraction (XRD), and Scanning electron microscopy (SEM) were used to characterize the structure, composition and morphology of MoS2. The results show that micro-MoS2 grains were synthesized with one-step hydrothermal synthesis, and the morphology of micro-MoS2 grains is like flower and sphere. The SEM figures indicate that the surface ratio of micro-MoS2 grains is different and also show that the surface ratio of micro-MoS2 grains can be improved by regulating reactant concentration and temperature. This research showed a method to improve the surface ratio of micro-MoS2 grains.