Gamier, A., Saint-Marc, J., Kermanac, H.Y. and Bois, A. (2008) Singular Methodology to Design Cement Sheath Integrity Exposed to Steam Stimulation. Society of Petroleum Engineers, International Thermal Operations and Heavy Oil Symposium, ITOHOS 2008, Calgary, 20-23 October 2008, 1-15.

has been cited by the following article:

• TITLE: Numerical Simulation for Hot Dry Rock Geothermal Well Temperature Field

  AUTHORS: Hao Yang, Yuan Shao

  KEYWORDS: Hot Dry Rock, Geothermal Well, Temperature Field, Numerical Simulation

  JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.7 No.1, December 21, 2016

  ABSTRACT: Study on temperature distribution simulation during cementing of hot dry rock (HDR) geothermal well is rare. It has important guiding significance to simulate the construction process of temperature distribution of hot dry rock on site construction. Based on numerical simulation of HDR considering heat-fluid-solid coupling, the influence of temperature distribution on well cementing is analyzed when the drilling fluid cycles and reaches stable state, respectively, and when the cement slurry is injected during the cementing process. It is found that the seepage at the well bottom accelerates the flow velocity of wellbore; the stable temperature change is less than the cyclic temperature change; and the upper and lower temperature variation of the stratum is greater when the cement slurry is injected. Therefore, as to cement retarder involved, the influence of temperature variation on concretion should be considered during cementing of the hot dry rock geothermal well.