Feng, L., Chen, H., Zhou, Y., Zhang, S., Yang, T. and An, L. (2016) The Development of a Thermo-Economic Evaluation Method for Solar Aided Power Generation. Energy Conversion and Management, 116, 112-119.
https://doi.org/10.1016/j.enconman.2016.01.072

has been cited by the following article:

• TITLE: The Impact of Optimum Insulation Thickness of External Walls to Energy Saving and Emissions of CO2 and SO2 for Turkey Different Climate Regions

  AUTHORS: Ö. Altan Dombayci, Harun Kemal Ozturk, Öner Atalay, Şengül Güven Acar, Eylem Yilmaz Ulu

  KEYWORDS: Optimum Insulation Thickness, Energy Saving, Environmental Impact

  JOURNAL NAME: Energy and Power Engineering, Vol.8 No.11, November 23, 2016

  ABSTRACT: In this study, the optimum insulation thickness of the external walls of the housing and it’s energy saving and environmental impact in the provinces—Ardahan, Aydin, Eskisehir and Samsun—located in four different climate regions of Turkey was calculated for the expanded polystyrene and polyurethane insulation materials. Natural gas and coal were selected as fuels. Ardahan in the coldest climate region and Aydin in the hottest climate region, for the coal and optimum thickness of expanded polystyrene and polyurethane insulation materials, the reduction of CO2 and SO2 emissions. In the study, the relations between annual energy cost saving and insulation thickness are given. The value of energy cost saving increases up to optimum insulation thickness and beyond this level, the energy cost saving is decreased. For coal and optimum thickness of expanded polystyrene and polyurethane insulation materials, the energy cost savings was higher for the cold climate regions when it was compared with the hot climate regions.