Zhou, Z., Buchanan, F., Mitchell, C. and Dunne, N. (2014) Printability of Calcium Phosphate: Calcium Sulfate Powders for the Application of Tissue Engineered Bone Scaffolds Using the 3D Printing Technique. Materials Science and Engineering: C, 38, 1-10.
http://dx.doi.org/10.1016/j.msec.2014.01.027

has been cited by the following article:

• TITLE: 3D Printed Scaffolds as a New Perspective for Bone Tissue Regeneration: Literature Review

  AUTHORS: Raquel Couto de Azevedo Gonçalves Mota, Emerson Oliveira da Silva, Felipe Fortes de Lima, Lívia Rodrigues de Menezes, Antonio Carlos Santos Thiele

  KEYWORDS: Scaffolds, 3D Printing, Tissue Engineering, Bone Tissue

  JOURNAL NAME: Materials Sciences and Applications, Vol.7 No.8, August 31, 2016

  ABSTRACT: Due to the high incidence of bone fractures in the population, it became necessary to produce scaffolds that are able to assist in tissue regeneration. It is necessary to find an appropriate balance between the mechanical and biological properties, in order to mimic the natural tissue, these properties are directly related to the architecture and their degree of porosity, as well as the size of their pores and their interconnectivity. In this perspective, the 3D printing stands out, where the structure is obtained layer by layer, according to a predetermined computational model which provides a greater control of architecture and scaffold geometry and overcomes, in this way, the limitations of traditional techniques of scaffolds manufacturing. In this way, the objective of this seminar is to present the state of the art of the polymer scaffolds produced by 3D printing and applied to bone tissue regeneration, highlighting the advantages and limitations of this process.