Chen, C.X., Chen, W.Z. and Zhang, Y.F. (2005) Synthesis of Carbon Nano-Tubes by Pulsed Laser Ablation at Normal Pressure in Metal Nano-Sol. Physica E: Low-Dimensional Systems and Nanostructures, 28, 121-127.
http://dx.doi.org/10.1016/j.physe.2005.02.006

has been cited by the following article:

• TITLE: Synthesis of Carbon Nanotubes Using Azerbaijan’s Oil

  AUTHORS: Sevda H. Abdullayeva, Asger B. Huseynov, Nahida N. Musayeva, Rasim B. Jabbarov, Chingiz A. Sultanov, Rovshan F. Hasanov

  KEYWORDS: Azerbaijan’s Oil, Aerosol-CVD, Gasoline Fraction, Fraction Jet Fuel, Ferrocene, SEM

  JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.6 No.5, May 5, 2016

  ABSTRACT: Distillate fractions of Azerbaijan’s oil-gasoline, jet fuel and diesel were tested as a raw material for producing carbon nanotubes. Aerosol CVD technique was employed at atmospheric and low pressures and ferrocene was used as a catalyst. It is shown that at atmospheric pressures carbon nanotubes were formed only from a gasoline fraction. Lower pressure in the reactor during the synthesis process leads to formation of carbon tubular structure from both petroleum fractions-gasoline and jet fuel. Other modifications of carbon were grown at atmospheric pressure in a case used fraction jet fuel and diesel fraction. MWCNTs with diameters of 35 - 65 nm have been grown at lower pressure in the reactor using gasoline fraction. The diameter of the MWNTs grown at atmospheric pressure in the reactor was in the range of 80 - 215 nm and the length reached 6 microns after the purification process.