Khosroabadi, S., Keshmiri, S.H. and Marjani, S. (2014) Design of a High Efficiency CdS/CdTe Solar Cell with Optimized Step Doping, Film Thickness, and Carrier Lifetime of the Absorption Layer. Journal of the European Optical Society, 9, 14052-1-14052-6.
http://dx.doi.org/10.2971/jeos.2014.14052

has been cited by the following article:

• TITLE: Experimental Optimization of the Output Power of a Copper Vapor Laser Using Air as a Buffer Gas

  AUTHORS: Mahboobeh Mirzaei, Saeid Behrouzinia, Masoud Sabaghi, Saeid Marjani, Kamran Khorasani, Batool Sajad

  KEYWORDS: Experimental Optimization, Copper Vapor Laser, Air Buffer Gas

  JOURNAL NAME: Optics and Photonics Journal, Vol.6 No.4, April 21, 2016

  ABSTRACT: In order to investigate the effect of the pressure buffer gas and frequency on the output power, a copper vapor laser with active medium length of 60 cm and bore of 16 mm has been operated and optimized using air as a buffer gas. The observed oscillatory behavior of the output power versus frequency is in good agreement with the previous reports. The measured results show the maximum output power of ~1.6W at the optimum pressure of 3.8 torr and frequency of 17 kHz. Abundance of the air and reduction of the system volume due to elimination of the gas handling system as well as the economically benefits are the advantages of the employing air as a buffer gas in the copper vapor laser operation.