J. C. Ruiz-Morales, J. Canales-Vazquez, J. Pena-Martinez, D. M. Lopez and P. Nunez, “On the Simultaneous Use of La0.75Sr0.25Cr0.5Mn0.5O3?δ as Both Anode and Cathode Material with Improved Microstructure in Solid Oxide Fuel Cells,” Electrochim. Acta, Vol. 52, No. 1, 2006, pp. 278-284. doi:10.1016/j.electacta.2006.05.006

has been cited by the following article:

• TITLE: Synthesis and Characterization of La0.75Sr0.25Cr0.5Mn0.5O3-δ Nanoparticles Using a Combustion Method for Solid Oxide Fuel Cells

  AUTHORS: V. S. Reddy Channu, Rudolf Holze, Edwin H. Walker, Rajamohan R. Kalluru

  KEYWORDS: Nanoparticles; Combustion method; Morphology; Carriers

  JOURNAL NAME: New Journal of Glass and Ceramics, Vol.1 No.2, July 21, 2011

  ABSTRACT: La0.75Sr0.25Cr0.5Mn0.5O3-δ (LSCM) perovskite nanoparticles for use as anode material in intermediate temperature solid oxide fuel cells (IT-SOFCs) were synthesized using 3,3’,3”- nitrilotripropionic acid (NTP), citric acid and oxalic acid as carriers via a combustion method. The influence of the carrier on phase and morphology of the obtained pristine products was characterized using X-ray diffraction (XRD), thermal gravimetric analysis (TGA), and scanning electron microscopy (SEM). XRD results showed, that the LSCM had rhombohedral symmetry with R-3c space group; a single phase LSCM perovskite formed after calcination of fired gel at 1200°C for 7 h. Scanning electron microscopy analysis of the pristine powders showed spherical shape and particle sizes in the range of 50 – 500 nm.