Colegrove, E., Banai, E., Blissett, E., Buurma, E., Ellsworth, E., Morley, M., Barnes, M., Gilmore, C., Bergeson, J.D., Dhere, R., Scott, R., Gessert, R. and Sivananthan, S. (2012) High-Efficiency Polycrystalline CdS/CdTe Solar Cells on Buffered Commercial TCO-Coated Glass. Journal of Electronic Materials, 41, 2833-2837.
http://dx.doi.org/10.1007/s11664-012-2100-z

has been cited by the following article:

• TITLE: A High Efficiency Ultrathin CdTe Solar Cell for Nano-Area Applications

  AUTHORS: Saeid Marjani, Saeed Khosroabadi, Masoud Sabaghi

  KEYWORDS: CdS/CdTe Solar Cell, Conversion Efficiency, Nano-Area Applications

  JOURNAL NAME: Optics and Photonics Journal, Vol.6 No.2, February 17, 2016

  ABSTRACT: Due to limited availability and the rising price of telluride, the biggest challenge in solar Photo-voltaic (PV) is to successfully design and fabricate optimized CdTe solar cells with reducing the cell thickness that show simultaneously high efficiency and current density. A novel structure of ultrathin CdTe solar cells is proposed in this paper that focuses on conversion efficiency. This structure achieved by rotating 90o in the base line structure that suggests high efficiency due to the high current density. The result showed a considerable improvement over the 15% efficiency of the reference solar cell. The proposed structure is quite noteworthy in reducing the amount of material used and associated losses. Under global air mass (AM) 1.5 conditions, an open-circuit voltage (Voc) of 866 mV, a short-circuit current density (Jsc) of 74.84 mA/cm2, and a fill factor (FF) of 48.2% were obtained corresponding to a conversion efficiency of 31.2%.