Ravenelle, R.M., Schüβler, F., D’Amico, A., Danilina, N., van Bokhoven, J.A., Lercher, J.A., Jones, C.W. and Sievers, C. (2010) Stability of Zeolites in Hot Liquid Water. The Journal of Physical Chemistry C, 114, 19582-19595.
http://dx.doi.org/10.1021/jp104639e

has been cited by the following article:

• TITLE: Hydrodeoxygenation of Bio-Oil on Bimetallic Catalysts: From Model Compound to Real Feed

  AUTHORS: Thuan Minh Huynh, Udo Armbruster, Luong Huu Nguyen, Duc Anh Nguyen, Andreas Martin

  KEYWORDS: Bimetallic Catalysts, Hydrodeoxygenation, Phenol, Bio-Oil, Ni-Co Alloy

  JOURNAL NAME: Journal of Sustainable Bioenergy Systems, Vol.5 No.4, November 27, 2015

  ABSTRACT: Two series of bimetallic Ni-Co catalysts and corresponding monometallic catalysts with ca. 20 wt% metal loading were evaluated in hydrodeoxygenation (HDO) of phenol as a model compound for bio-oil. The bimetallic catalysts outperformed the corresponding monometallic catalyst in terms of conversion and cyclohexane selectivity. This could be attributed to the formation of Ni-Co alloy, which caused a decrease in metal particle size and stabilized Ni active sites in the near surface region. The balanced combination of formed Ni-Co alloy with acidity from supports allowed performing all individual steps in the reaction network toward desired products at high rate. Consequently, the two best-performing catalysts were tested in HDO of wood based bio-oil, showing that the bimetallic catalyst 10Ni10Co/HZSM-5 was more effective than 20Ni/HZSM-5 in terms of degree of deoxygenation and upgraded bio-oil yield. These findings might open an opportunity for development of a novel cheap but effective catalyst for a key step in the process chain from biomass to renewable liquid fuels.