Miura, K., Osawa, T., Suzuki, T., Yokota, Y. and Hanaizumi, O. (2015) Yellow Light Emission from Ta2O5:Er, Eu, Ce Thin Films Deposited Using a Simple Co-Sputtering Method. Results in Physics, 5, 26-27.
http://dx.doi.org/10.1016/j.rinp.2014.11.003

has been cited by the following article:

• TITLE: Preparation of CuO-Ta2O5 Composites Using a Simple Co-Sputtering Method

  AUTHORS: Kenta Miura, Takumi Osawa, Yuya Yokota, Zobaer Hossain, Osamu Hanaizumi

  KEYWORDS: Ta2O5, CuO, Co-Sputtering, X-Ray Diffraction, Photoluminescence

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.3 No.9, September 22, 2015

  ABSTRACT: We prepared CuO-Ta2O5 composite films using our simple co-sputtering method for the first time. Four specimens were prepared from an as-deposited CuO-Ta2O5 sample by cutting it using a diamond- wire saw, and the specimens were subsequently annealed at 600°C - 900°C. The X-ray diffraction and photoluminescence (PL) of the annealed specimens were evaluated. The CuO-Ta2O5 film annealed at 600°C seemed to be primarily amorphous phase, and a sharp PL peak at a wavelength of 450 nm, due to the existence of Cu2+, was observed from the film. In contrast, the CuO-Ta2O5 films annealed at 700°C, 800°C, and 900°C seemed to be tetragonal CuTa2O6 phases. We expect that good-quality CuTa2O6 films can be obtained using our very simple co-sputtering method and subsequent annealing above 900°C. Such CuTa2O6 films can be used in chemisorptions conductometric gas sensors.