Li, Z.Q., Zhou, G.H. and Zhou, Z.M. (2006) The Feasibility Studies of Polymer Foam Flooding in Gudao Oilfield. Proceedings of the SPE Asia Pacific Oil & Gas Conference and Exhibition, Adelaide, 11-13 September, 1-8.
http//dx.doi.org/10.2118/101189-ms

has been cited by the following article:

• TITLE: Polymer Foam Flow in Porous Media under Different Injection Modes

  AUTHORS: Wei Zhao, Haiqing Cui, Keliang Wang

  KEYWORDS: Injection Mode, Polymer Foam, Porous Media, Mathematical Model, Numerical Calculation

  JOURNAL NAME: Energy and Power Engineering, Vol.7 No.8, August 20, 2015

  ABSTRACT: The mathematical models of the flow of polymer foam in porous media under three injection modes are established and the relevant numerical calculation methods are given. The profiles of the liquid phase saturation, the pressure drop and the number density of the flowing HPAM foam in artificial sandstone cores with the dimensionless distance under three injection modes are numerically calculated and analyzed. The results show that, compared with the injection mode 2 and 3, HPAM foam flows in a piston-like fashion in the artificial sandstone core under the injection mode 1 and produces the biggest pressure drop. Obviously, the flood efficiency is the highest under the injection mode 1.