van Tol, A.F., Tibballs, J.E., Gjerdet, N.R. and Ellison, P. (2013) Experimental Investigation of the Effect of Surface Roughness on Bone-Cement-Implant Shear Bond Strength. Journal of the Mechanical Behavior of Biomedical Materials, 28, 254-262.
http://dx.doi.org/10.1016/j.jmbbm.2013.08.005

has been cited by the following article:

• TITLE: Effects of Laser Pulse Numbers on Surface Biocompatibility of Titanium for Implant Fabrication

  AUTHORS: Mitra Radmanesh, Amirkianoosh Kiani

  KEYWORDS: Laser Surface Micro Texturing, Titanium, Implant, Biocompatability, Hydroxyapatite Deposition

  JOURNAL NAME: Journal of Biomaterials and Nanobiotechnology, Vol.6 No.3, July 9, 2015

  ABSTRACT: Generally, materials with high biocompatibility are more appropriate for bone and tissue transplant applications, due to their higher effectiveness in the healing process and infection problems. This study presents the effects of laser surface texturing on the surface topography properties, roughness, and wettability of thin titanium sheets, which consequently enhance the biocompatibility of this material. Creating line patterns across the surfaces, the titanium samples are prepared using variety of laser parameters. The apatite inducing ability of each sample is tested through the use of simulated body fluid (SBF). The final biocompatibility level of titanium samples is analyzed through wettability, surface angle measurements, and average surface temperature profile. Overall, the effects of laser parameter, pulse numbers, upon the biocompatibility of titanium are thoroughly examined, with results indicating that a scanning speed of 100 μm/ms results in desirable bone type apatite inducing abilities across the surface of treated titanium sheets.