The Effect of Retrofit Technologies on Formaldehyde Emissions from a Large Bore Natural Gas Engine
Daniel B. Olsen, Bryan D. Willson
.
DOI: 10.4236/epe.2011.34071   PDF    HTML     6,331 Downloads   10,297 Views   Citations

Abstract

Formaldehyde is an air toxic that is typically emitted from natural gas-fired internal combustion engines as a product of incomplete combustion. The United States Environmental Protection Agency (EPA) regulates air toxic emissions, including formaldehyde, from stationary reciprocating internal combustion engines. National air toxic standards are required under the 1990 Clean Air Act Amendments. This work investigates the effect that hardware modifications, or retrofit technologies, have on formaldehyde emissions from a large bore natural gas engine. The test engine is a Cooper-Bessemer GMV-4TF two stroke cycle engine with a 14” (35.6 cm) bore and a 14” (35.6 cm) stroke. The impact of modifications to the fuel injection and ignition systems are investigated. Data analysis and discussion is performed with reference to possible formaldehyde formation mechanisms and in-cylinder phenomena. The results show that high pressure fuel injection (HPFI) and precombustion chamber (PCC) ignition significantly reduce formaldehyde emissions

Share and Cite:

D. Olsen and B. Willson, "The Effect of Retrofit Technologies on Formaldehyde Emissions from a Large Bore Natural Gas Engine," Energy and Power Engineering, Vol. 3 No. 4, 2011, pp. 574-579. doi: 10.4236/epe.2011.34071.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] G. S. Shareef, K. R. Ferry, M. Gundappa, C. A. Leatherwood, L. D. Ogle, L. M. Campbell, Gas Research Institute, “Measurement of Air Toxic Emissions from Natural Gas-Fired Internal Combustion Engines at Natural Gas Transmission and Storage Facilities,” Gas Research Institute, Amsterdam, 1996.
[2] L. F. Coerr, S. P. Coerr and S. L. Clowney, “EPA’s Regulation of Air Toxic Emissions under the Industrial Combustion Coordinated Rulemaking (ICCR),” Proceedings of the 1998 Spring Technical Conference of the ASME Internal Combustion Engine Division, Vol. 1, Fort Lauderdale, 26-29 April 1998.
[3] D. B. Olsen and C. E. Mitchell, “Formaldehyde Formation in Large Bore Engines Part 2: Factors Affecting Measured CH2O,” Journal of Engineering for Gas Turbines and Power, Vol. 122, No. 4, 2000, pp. 611-616. doi:10.1115/1.1290586
[4] P. K. Kirschner, “Formaldehyde Emissions From Caterpillar 3600 Series Engines Utilizing Field Gas as Fuel,” Proceedings of the 1998 Spring Technical Conference of the ASME Internal Combustion Engine Division, Vol. 1, Fort Lauderdale, 26-29 April 1998.
[5] C. E. Mitchell and D. B. Olsen, “Formaldehyde Formation in Large Bore Natural Gas Engines Part 1: Formation Mechanisms,” Journal of Engineering for Gas Turbines and Power, Vol. 122, No. 4, 2000, pp. 603-610. doi:10.1115/1.1290585
[6] D. B. Olsen, J. C. Holden, G. C. Hutcherson and B. D. Willson, “Formaldehyde Characterization Utilizing In- Cylinder Sampling in a Large Bore Natural Gas Engine,” Journal of Engineering for Gas Turbines and Power, Vol. 123, No. 3, 2001, pp. 669-676. doi:10.1115/1.1363601
[7] D. B. Olsen and B. D. Willson, “The Effect of Parametric Variations on Formaldehyde Emissions from a Large Bore Natural Gas Engine,” Proceedings ASME-ICE Spring Technical Conference, ICE-Vol. 38, Paper No. 2002-ICE-446, 2002.
[8] B. Willson, G. Hutcherson, S. Hawley and K. Willett, “Relative Performance of High-Pressure Fuel Gas Delivery on Large-Bore, Two-Stroke Natural Gas Engines,” Gas Machinery Conference Proceedings, Austin, October 1997.
[9] B. Willson, G. Hutcherson, D. Olsen and J. Holden, “Evaluation of High Pressure Injection of Fuel Gas in Large-Bore Natural Gas Engines, GRI-99/0275, 1999.
[10] A. Kirkpatrick, Y. Li, C. Mitchell and B. Willson, “Analytical and Computational Modeling of High Pressure Gas Injection,” Proceedings ASME ICE Fall Technical Conference, Vol. 37-2, Paper No. 2001-ICE-410, 2001.
[11] D. B. Olsen, D. B. Mastbergen and B. D. Willson, “Planar Laser Induced Fluorescence Imaging of Gas Injection from Fuel Valves for Large Bore Natural Gas Engines,” Proceedings ASME-ICE Fall Technical Conference, Vol. 37-2, Paper No. 2001-ICE-409, 2001.
[12] D. B. Olsen and J. M. Lisowski, “Prechamber NOx Formation in Low BMEP 2-Stroke Cycle Natural Gas Engines,” Applied Thermal Engineering, Vol. 29, No. 4, 2009, pp. 687-694. doi:10.1016/j.applthermaleng.2008.03.049
[13] D. B. Olsen andA.T. Kirkpatrick, “Experimental Examination of Prechamber Heat Release in a Large Bore Natural Gas Engine,” Journal of Engineering for Gas Turbines and Power, Vol. 130, No. 5, 2008, pp. 052802-052809. doi:10.1115/1.2906182
[14] D. B. Olsen and B. D. Willson, “The Impact of Cylinder Pressure on Fuel Jet Penetration and Mixing”, Proceedings ASME-ICE Fall Technical Conference, Vol. 39, New Orleans, 8-11 September 2002, pp. 233-239.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.