Enhancement in Elastic Modulus of GFRP Bars by Material Hybridization

Dong-Woo Seo, Ki-Tae Park, Young-Jun You, Hyeong-Yeol Kim

Structural Engineering Research Division, Korea Institute of Construction Technology, Goyang, Republic of Korea.

DOI: 10.4236/eng.2013.511105                

Abstract

Fiber reinforced polymer (FRP) reinforcing bars for concrete structure has been extensively investigated for last two decades and a number of FRP bars are commercially available. However, one of shortcomings of the existing FRP bars is its low elastic modulus, if glass fibers are used (i.e., GFRP). The main objective of this study using the concept of material hybridization is to develop a viable hybrid FRP bar for concrete structures, especially for marine and port con- crete structures. The purposes of hybridization are to increase the elastic modulus of GFRP bar with acceptable tensile strength. Two types of hybrid GFRP bar were considered in the development: GFRP crust with steel core and GFRP bar with steel wires dispersed over the cross-section. Using E-glass fibers and unsaturated polyester resins, the hybrid GFRP bar samples of 13 mm in diameter were pultruded and tested for tensile properties. The effect of hybridization on tensile properties of GFRP bars was evaluated by comparing the results of tensile test with those of non-hybrid GFRP bars. The results of this study indicated that the elastic modulus of the hybrid GFRP bar was increased by up to 270 percent by the material hybridization. The results of the test and the future recommendations are summarized in this paper. To ensure long-term durability of the hybrid GFRP bars in waterfront structure applications, the individual and combined effects of environmental conditions on hybrid GFRP rebar itself as well as on the interface between rebar and concrete should be accessed.

Keywords

FRP; Glass Fibers; Tensile Test; Elastic Modulus; Pultrusion; Material Hybridization; Marine Structures

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	A. A. Mufti, M.-A. Erki and L. G. Jaeger, “Advanced Composites Materials with Application to Bridges,” Canadian Society of Civil Engineers, Montreal, 1991.
[2]	G. Kretsis, “A Review of the Tensile, Compressive, Flexural and Shear Properties of Hybrid Fibre-Reinforced Plastics,” Composites, Vol. 18, No. 1, 1987, pp. 13-23. http://dx.doi.org/10.1016/0010-4361(87)90003-6
[3]	K. D. Jones, A. T. Di Benedetto, “Fiber Fracture in Hybrid Composite Systems,” Composites Science and Technology, Vol. 51, No. 1, 1994, pp. 53-62. http://dx.doi.org/10.1016/0266-3538(94)90156-2
[4]	C. E. Bakis, A. Nanni, J. A. Terosky and S. W. Koehler, “Self-Monitoring, Pseudo-Ductile, Hybrid FRP Reinforcement Rods for Concrete Applications,” Composites Science and Technology, Vol. 61, No. 6, 2001, pp. 815823. http://dx.doi.org/10.1016/S0266-3538(00)00184-6
[5]	L. Taerwe, “Non-Metallic FRP Reinforcement for Concrete Structures: Proceedings of the Second International Rilem Symposium,” Taylor & Francis, London, 1995.
[6]	Korea Institute of Construction Technology (KICT). www.kict.re.kr
[7]	Korea Institure of Construction Technology (KICT), “Design and Construction Technology for Concrete Structures Using Advanced Composite Materials: FRP Rebars and Grids (in Korean),” Korea Research Council of Public Science and Technology, Interim Report, 2004.
[8]	Y.-J. You, Y.-H. Park, H.-Y. Kim and J.-S. Park, “Hybrid Effect on Tensile Properties of FRP Rods with Various Material Compositions,” Composite Structures, Vol. 80, No. 1, 2007, pp. 117-122. http://dx.doi.org/10.1016/j.compstruct.2006.04.065
[9]	ASLAN. www.aslanfrp.com
[10]	V-Rod. www.vrod.ca
[11]	Owens Corning. http://www.owenscorning.co.kr/
[12]	ASTM. D 3916, “Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rods,” 2002.
[13]	CSA, “Test Method for Tensile Properties of FRP Reinforcement,” Canadian Standard Association, 2002.