[1]
|
Caspary, Wilhelm; Wang, Jianguo (1998). Redundanzanteile und Varianzkomponenten im Kalman Filter. Vol.123, No.4, 1998, pp.121-128.
|
[2]
|
Chrzanowski, A.; Chen, Y. Q. (1986). Report on the Ad Hoc Committee on the Analysis of Deformation Surveys. XVIII International Congress FIG, Toronto, Canada, 1~11 June 1986, pp. 166–185.
|
[3]
|
Gelb, Arthur et al. (1974). Applied Optimal Estimation. The Analytic Sciences Corporation & The M.I.T. Press, Cambridge Massachusetts London, 1974.
|
[4]
|
Huep, Wolfgang (1986). Zur Positionssch?tzung im gest?rten Kalman–Filter am Beispiel eines man?vrierenden Wasserfahrzeuges. Dissertation, Wissenschaftliche Arbeiten der Fachrichtung Vermessungswesen der Universit?t Hannover, Heft 143, Hannover, 1986.
|
[5]
|
Koch, K. Rudolf (1990). Bayesian Inference with Geodetic Applications, 2nd edition, Springer-Verlag, Berlin, 1990.
|
[6]
|
Loffeld, Otmar. (1990). Estimationstheorie II, Anwendung–Kalman–Filter. R. Oldenbourg Verlag, München Wien, 1990.
|
[7]
|
Maybeck, Peter S. (1979). Stochastic models, estimation, and control. Volume 1, Academic Press, New York, 1979.
|
[8]
|
Mehra, R. K.; Peschon, J. (1971). An Innovations Approach to Fault Detection and Diagnosis in Dynamic Systems. Automatica, Vol. 16, 1971, S. 637–640.
|
[9]
|
Pelzer, Hans (1987). Deformationsuntersuchungen auf der Basis kinematischer Bewegungsmodelle. AVN, Year 94, No. 2, February 1987, pp. 49~62.
|
[10]
|
Salzmann, Martin; Teunissen, P.J.G. (1989). Quality Control in Kinematic Data Processing. Land Vehicle Navigation 1989, DGON, Verlag TüV Rheinland, K?ln, 1989, pp. 355–366.
|
[11]
|
Salzmann, Martin (1993). Least Squares Filtering and Testing for Geodetic Navigation Applications. Number 37, Publication on Geodesy, Netherlands Geodetic Commission, Delft, 1993.
|
[12]
|
Schlee, F. H.; Standish, C. J.; et al (1967). Divergence in the Kalman Filter. AIAA Journal, Vol. 5, No. 6, June 1967, pp.1114–1120.
|
[13]
|
St?hr, M. (1986). Der Kalman–Filter und seine Fehlerproze?e unter besonderer Berücksichtigung der Auswirkung von Modellfehlern. Forschung–Ausbildung–Weiterbildung Bericht Heft 19, Universit?t Kaiserlautern, Fachbereich Mathematik, August 1986.
|
[14]
|
Tao, Benzao (1992). Statistic Analysis of Measurements. Publishing house of Surveying and Mapping, Beijing, June 1992.
|
[15]
|
Tarn, T. J.; Zaborszky, J. (1970). A Practical, Nondiverging Filter. AIAA Journal, Vol. 8, No. 6, June 1970, pp.1127–1133.
|
[16]
|
Wang, Jianguo (1997). Filtermethoden zur fehlertoleranten kinematischen Positions-bestimmung. Schritenreihe Studiengang Vermessungswesen, Federal Arm-Forced University Munich, Germany, No. 52, Neubiberg, 1997.
|
[17]
|
Willsky, Alan S., Deyst, J. J.; Crawford, B. S. (1974). Adaptive Filtering and Self–Test Methods for Failure Detection and compensation. Proceedings of the 1974 JACC, Austin, Texas, June 19–21, 1974.
|
[18]
|
Willsky, Alan S., Deyst, J. J.; Crawford, B. S. (1975). Two Self–Test Methods Applied to an Inertial System Problem. Journal of Spacecraft, Vol. 12, No. 7, July 1975, S. 434–437.
|
[19]
|
Willsky, Alan S. (1976). A Survey of Design Methods for Failure Detection in Dynamic Systems. Automatica, Vol. 12, 1976, pp. 601–611.
|
[20]
|
Yoshimura, Toshio; et al. (1979). A Sequential Failure Detection Approach and the Identification of Failure Parameters. International Journal of System Science, Vol. 10, No. 7, 1979, S. 827 –836.
|