Share This Article:

Resolving a Challenge in the Modeling of Hydrogen Production Using Steam Reforming of Methane in Monolith Reactors Using CFD Methods

Abstract Full-Text HTML Download Download as PDF (Size:269KB) PP. 248-252
DOI: 10.4236/ampc.2012.24B063    6,091 Downloads   7,740 Views  
Author(s)    Leave a comment

ABSTRACT

Reaction modeling of SMR (Steam Methane Reforming) process inside monolith reactors using two approaches were investigated and compared with each other. In the first approach, the reactions were assumed to take place exactly on the wall surfaces, while in the second approach they considered inside a thin thickness near the walls. Experiments of SMR were carried out in a lab-scale monolith reactor. A single-channel was considered and CFD model were developed for each of aforementioned approaches. Comparisons between modeling results and experimental data showed that the first approach (surface model) gives better results. Performing reactions are difficult and expensive, CFD simulations are considered as numerical experiments in many cases. It was concluded that obtained results from CFD analysis gives precise guidelines for further studies on optimization of SMR monolithic reactor performance.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

M. Irani, "Resolving a Challenge in the Modeling of Hydrogen Production Using Steam Reforming of Methane in Monolith Reactors Using CFD Methods," Advances in Materials Physics and Chemistry, Vol. 2 No. 4B, 2012, pp. 248-252. doi: 10.4236/ampc.2012.24B063.

References

[1] A.Y. Tonkovich , S. Perry, Y. Wang, D. Qiu, T. LaPlante and W.A. Rogers , “Microchanel process technology for compact Methane steam reforming,” Chem. Eng .Sci , vol. 59, pp. 4819–4824, 2004.
[2] D. Hickman and L.D. Schmidt, “ Production of syngas by direct catalytic oxidation of Methane”, Science , vol. 259, pp. 343–346,1993.
[3] E.E. Gonzo, “ Hydrogen from methanol-steam reforming. Isothermal and adiabatic monolith reactors’ simulation.” ,Int J Hydrogen Energy, vol.33,pp. 3511 – 3516, 2008.
[4] E. Lo′pez, A. Irigoyen, T. Trifonov, A. Rodr?′guez, J. Llorca, “ A million-channel reformer on a fingertip: Moving down the scale in hydrogen production”, Int.J. Hydrogen Energy, vol.35 ,pp. 3472 – 3479, 2010.
[5] L. Shi, “ Bayless D J and Prudich M E. A CFD model of autothermal reforming”, Int J Hydrogen Energy ,vol .35 ,pp. 3472 – 3479 , 2010.
[6] W. Cai, F. Wang, A.V. Veen, C. Descorme, Y. Schuurman and W. Shen , “ Mirodatos C. Hydrogen production from ethanol steam reforming in a micro-channel reactor”, Int J Hydrogen Energy, vol. 35,pp. 1152 – 1159, 2010.
[7] X. Zhai, S. Ding, Y. Cheng, Y. Jin and Y. Cheng, “ CFD simulation with detailed chemistry of steam reforming of Methane for hydrogen production in an integrated micro-reactor” , Int J Hydrogen Energy , vol. 35, pp. 5383 – 5392, 2010.
[8] T. Boger, “ Monolithic catalysts for the chemical Industry”, Ind Eng Chem Res, vol.43 ,pp. 4602-4611, 2004.
[9] R.S. Benson and J .W. Ponton., “ Process Miniaturisation-A Route to Total Environmental Acceptability”, Chem. Eng. Res. Des. ,vol. 71,pp. 160–168,1993.
[10] A.Y. Tonkovich, B. Yang , S.T. Perry, S.P. Fitzgerald, Y. Wang , “ From seconds to milliseconds to microseconds through tailored microchannel reactor design of a steam Methanereformer” , Catal Today , vol.120 ,pp. 21-29, 2007.
[11] R. J. Bradley, L.C. Nathan, N.T. Diana, A.D. Robert, D.H. Jamelyn, Y. Wang , “ Engineered SMR catalysts based on hydrothermally stable, porous, ceramic supports for microchannel reactors” ,Catal Today,vol. 120 , pp. 54-62, 2007.
[12] A.K. Avci, D.L. Trimm, M. Karakaya, “ Microreactor catalytic combustion for chemicals processing”, Catal To-day,vol.155 ,pp. 66-74 ,2010.
[13] G. Arzamendi, P.M. Diéguez, M. Montes, J.A. Odriozola, E. Falabella, E. Sousa-Aguiar and L.M .Gandía, “Methane steam reforming in a microchannel reactor for GTL intensification: A computational fluid dynamics simulation study ”, Chemical Engineering Journal , vol.168 ,pp. 168-173, 2009.
[14] A. Fazeli, M. Behnam, “ Hydrogen production in a zigzag and straight catalytic wall coated micro channel reactor by CFD modeling”, Int J Hydrogen Energy, vol.35 ,pp. 9496-9503, 2009..
[15] G. Arzamendi, P.M. Diéguez, M. Montes, M.A . Centeno, J.A. Odriozola, L.M . Gandía, “Integration of methanol steam reforming and combustion in a microchannel reactor for H2 production: A CFD simulation study ”, Catalysis Today, vol.143, pp. 25-31,2009.
[16] S. Fukahori, H. Koga, T . Kitaoka, M. Nakamura, H. Wariis hi , “ Steam reforming behavior of methanol using paper-structured catalysts: experimental and computational fluid dynamic analysis”, Int J Hydrogen Energy, vol. 33, pp. 1661-70?2008.
[17] I.Uriz, G.Arzamendi, E.,López,J. Llorca, L.M. Gandía , “Computational fluid dynamics simulation of ethanol steam reforming in catalytic wall microchannels ”, Chemical Engineering Journal, vol.167 ,pp. 536-544 ,2011.
[18] L. Shi, D.J. Bayless and M.E. Prudich , “ A CFD model of autothermal reforming” , Int J Hydrogen Energy, vol.34 ,pp. 7666-7675, 2009.
[19] M. Hartmanna, L . Maierb, O. Deutschmann, “ Hydrogen production by catalytic partial oxidation of iso-octane at varying flow rate and fuel/oxygen ratio: From detailed kinetics to reactor behavior”, Applied CatalysisA:General , vol.391, pp. 144–152, 2011.
[20] M . Hartmann, L. Maier and H.D .Minh, “ Deut-schmann O. Catalytic partial oxidation of iso-octane over rhodium catalysts: An experimental, modeling, and simulation study”, Combustion and Flame , vol.157, pp. 1771–1782,2010.
[21] K. Zygourakis and R. Aris, “ Multiple oxidation reactions and diffusion in the catalytic layer of monolith reactors”, Chem. Eng Sci ,vol.32, pp. 733-744 ,1983.
[22] Influence of the propene diffusion inside the catalytic layer”, Chemical Engineering Science, vol.55,pp. 1707-1716,2000.
[23] M.J. Stutz, D. Poulikakos, “ Optimum washcoat thickness of a monolith reactor for syngas production by partial oxidation of Methane” ,Chemical Engineering Science ,vol.63 ,pp. 1761 – 1770,2008.
[24] N. Mladenov, J. Koop, S. Tischer, O. Deutschmann “Modeling of transport and chemistry in channel flows of automotive catalytic converters ”, Chem.Eng.Sci, vol.65, pp. 812-826, 2010.
[25] Hoseini N, Msc thesis, Tarbiat Modares University: Tehran- Iran, 2010.
[26] J.P. Du Plessis, W.G. Gray, “ Pore-scale modeling of interstitial transport phenomena. In: Fluid Transport in Porous media”, Computational Mechanics Publication Southampton, pp. 61–104,1997.
[27] H.K. Plummer, R.J. Jr, R.H. Baird, A.A. Hammerle and Adamczyk JD, “Measurement of Automotive Catalyst Washcoat Loading Parameters by Microscopy Techniques”, Microscopy and Microanalysis, vol.5, pp. 267-281,1999.

  
comments powered by Disqus

Copyright © 2019 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.