A Novel Over-Current Protection Technique Applied to Peak-Current Type DC-DC Converter
Yu Fang, Tengfei Wei, Liang He, Yong Xie, Yan Xing
.
DOI: 10.4236/jemaa.2010.26045   PDF    HTML     7,145 Downloads   12,062 Views   Citations

Abstract

The change of the over-current protection point of the power switches, caused by slope compensation, is analyzed in detail. It is discovered that the peak current protecting value increases as the duty cycle decreases. As a result, the safety operation of the switches is damaged greatly. A novel solution to improve over-current protection with constant peak current limitation is proposed by inducing synchronous slope compensation into the current limit function instead of the original constant voltage. The design principle and method of the protection circuit based on a UC3846 PWM controller for the interleaved dual-forward converter is presented. Experimental results are given to verify the analysis.

Share and Cite:

Y. Fang, T. Wei, L. He, Y. Xie and Y. Xing, "A Novel Over-Current Protection Technique Applied to Peak-Current Type DC-DC Converter," Journal of Electromagnetic Analysis and Applications, Vol. 2 No. 6, 2010, pp. 352-356. doi: 10.4236/jemaa.2010.26045.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] X. Yang and Z. A. Wang, “A Novel Quasi-Constant Hysteretic PWM Current Mode Control Approach,” Transactions of China Electrotechnical Society, Vol. 18, No. 3, 2003, pp. 24-28.
[2] X. Yan, “Research on Parallel Operation of Current Regulated Inverters,” pH.D Dissertation, Nanjing University of Aeronautics and Astronautics, Nanjing, 1999.
[3] T. J. Liang and K. C. Tseng, “Analysis of Integrated Boost- Flyback Step-Up Converter,” IEE Proceedings on Electronical Power Application, Vol. 152, No. 2, 2005, pp. 217-225.
[4] G.-M Chen, J.-L Cao and X.-C. Wang, “Design and Implementation of Ramp-Wave Generator in Peak Current Controlled BOOST DC-DC Converter,” Journal of Shanghai University, Natural Science Edition, Vol. 8, 2004, pp. 357-361.
[5] M. K. Kazimierczuk, “Transfer Function of Current Modulator in PWM Converters with Current-Mode Control,” IEEE Transactions on Circuits and Systems, Vol. 47, No. 9, 2000, pp. 1407-1412.
[6] F. Han, D. H. Xu and M. Matsui, “A Novel ZVT Circuit for Interleaving Two-Transistor forward Converter,” Proceeding of IEEE APEC, 2000, pp. 754-759.
[7] J. Li and Y. Xing “Research on Variable Low Voltage High Current DC-DC Converter,” The Eighth International Conference on Electrical Machines and System, 2005, pp. 118-129.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.