General Purpose Wireless Communication System Using Data Acquisition

Abstract

A sensor-enabled and RFID-integrated, Wireless Data Acquisition System (WDAS) that has similar functionality as multiple input multiple output (MIMO) systems for health-care applications has been developed, simulated and implemented. The system can accept various measurements via sensors placed on patients or elders and transmit information wirelessly to base station at a remote location. A microcontroller is used to control and process the signals submitted from sensor-enabled RFID devices using sequential logic. Processed signals are then sent to single receiver and transmitter pair instead of conventional MIMO antenna systems. This reduces the cost significantly in comparison to existing systems. It has been shown that the data transmitted from measurement locations can be acquired at the base station located 20 mile away. Data acquisition system (DAQ) is used to determine the measured value, apply the required statistics and display information to health-care professional at the base station. The system developed can be used for health-care applications including nursing homes in rural areas where access is difficult.

Share and Cite:

A. Eroglu and B. Westrick, "General Purpose Wireless Communication System Using Data Acquisition," Communications and Network, Vol. 4 No. 1, 2012, pp. 48-53. doi: 10.4236/cn.2012.41007.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] K. Arshak, F. Adepoju and E. Jafer, “Simulation and Characterization of Wireless Data Acquisition RF Systems for Medical Diagnostic Application,” Proceedings of IEEE Design and Diagnostics of Electronic Circuits and Systems (DDECS), Krakow, 11-13 April 2007, pp. 1-4. doi:10.1109/DDECS.2007.4295268
[2] K. Arshak and F. Adepoju, “Verification of Wireless Data Acquisition Radio Frequency System for Medical Telemetry Application,” International Spring Seminar on Electronics Technology, Cluj-Napoca, 9-13 May 2007, pp. 439-444.
[3] A. Dinh, D. Teng, L. Chen, S. B. Ko, Y. Shi, J. Basran and V. Del Bello-Hass, “Data Acquisition System Using Six Degree-of-Freedom Inertia Sensor and Zigbee Wireless Link for Fall Detection and Prevention,” Proceedings of IEEE Engineering in Medicine and Biology Society (EMBS), Vancouver, 20-24 August 2008, pp. 2353-2356.
[4] L. X. Wang, S. Wei and L. Chao, “Implementation of High Speed Real Time Data Acquisition and Transfer System,” Proceedings of IEEE Industrial Electronics and Applications Conference (ICIEA), Xi’an, 25-27 May 2009, pp. 382-386.
[5] Z. Yu, J. Wu, M. Xie and Y. Kong, “Implementation of Distributed High Precision Real-Time Data Acquisition System,” Proceedings of IEEE-NPSS Real Time Conference, Beijing, 10-15 May 2009, pp. 446-449. doi:10.1109/RTC.2009.5321600
[6] CL4790-1000-232, “ConnexLink-Wireless Cable Replacement System,” Datasheet.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.