Share This Article:

Comparison between Two FT-IR Spectroscopy Analytical Procedures for Micrograms Determination of Asbestos Species in Bulk Materials

DOI: 10.4236/ajac.2012.31001    6,397 Downloads   11,558 Views   Citations

ABSTRACT

The Fourier Transform Infrared (FT-IR) spectroscopy is by far known to be a useful technique for qualitative and quantitative analysis of asbestos in bulk samples, since all asbestos species exhibit intense absorption peaks in the 4000 - 400 cm-1 region of the infrared spectrum. In the present work, we compare the accuracy and precision of two analytical procedures (the Linear Calibration Curve Method and the Method of Addition) for the quantitative determination of asbestos in a host matrix. We have found that, providing careful samples preparation, both techniques quantify the asbestos content at the level of few micrograms with good precision. Due to less expensive equipment requirements and shorter analysis time, FT-IR can be a competitive analytical technique in the characterization of asbestos containing material with the respect to diffractometry or electron microscopy.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

L. Stefano, R. Cioffi and F. Colangelo, "Comparison between Two FT-IR Spectroscopy Analytical Procedures for Micrograms Determination of Asbestos Species in Bulk Materials," American Journal of Analytical Chemistry, Vol. 3 No. 1, 2012, pp. 1-5. doi: 10.4236/ajac.2012.31001.

References

[1] F. Colangelo, R. Cioffi, M. Lavorgna, L. Verdolotti and L. De Stefano, “Treatment and Recycling of Asbestos-Ce- ment Con-taining Waste,” Journal of Hazardous Materials, Vol. 195, 2011, pp. 391-397. doi:10.1016/j.jhazmat.2011.08.057
[2] C. Giacobbe, A. F. Gualtieri, S. Quartieri, C. Rinaudo, M. Allegrina and G. B. Andreozzi, “Spectroscopic Study of the Product of Thermal Transformation of Chrysotile- Asbestos Containing Materials (ACM),” European Journal of Mineralogy, Vol. 22, No. 4, 2010, pp. 535-546. doi:10.1127/0935-1221/2010/0022-2038
[3] S. Pereira da Silva, A. P. Wander, R. Bisatto and G. B. Galland, “Preparation and Characterization of Chrysotile for Use as Nanofiller in Polyolefins,” Nanotechnology, Vol. 22, No, 10, 2011, pp. 105701-105707.
[4] L. De Stefano, G. Buccolieri and F. De Luca, “Analytical Methods for Quantitative Asbestos Determi-nation by X-Ray Diffraction,” Annali di Chimica, Vol. 88, 1998, pp. 839-847.
[5] G. A. Luoma, L. K. Yee and R. Rowland, “Determination of Microgram Amounts of Asbestos in Mixtures by Infrared Spectrometry,” Analytical Chemistry, Vol. 54, No. 12, 1982, pp. 2140-2142. doi:10.1021/ac00249a064
[6] A. Marconi, “Application of Infrared Spectroscopy in Asbestos Mineral Analysis,” Annali Istituto Superiore Sanità, Vol. 19, No. 4, 1983, pp. 629-638.
[7] I. R. Lewis, N. C. Chaffin, M. E. Gunter and P. R. Griffiths, “Vibrational Spectroscopic Studies of Asbestos and Comparison of Suitability for Remote Analysis,” Spectrochimica Acta A, Vol. 52, No. 3, 1996, pp. 315-328. doi:10.1016/0584-8539(95)01560-4
[8] M. Risti?, I. Czakó-Nagy, S. Musi? and A. Vértes, “Spectroscopic Charac-terization of Chrysotile Asbestos from Different Regions,” Journal of Molecular Structure, Vol. 993, No. 1-3, 2011, pp. 120-126. doi:10.1016/j.molstruc.2010.10.005
[9] L. De Stefano, G. Buccolieri, F. De Luca and P. Plescia, “Milling Effects upon Quantitative Determination of Chrysotile Asbestos by the RIR Method,” Powder Diffraction, Vol. 15, No. 1, 2000, pp. 26-29.
[10] D. C. Harris, “Quantitative Chemical Analysis,” W. H. Freeman & Co., San Francisco, 2002.
[11] J. Salisbury, “Infrared Spectra of Minerals,” Johns Hopkins University Press, Baltimore, 1992.

  
comments powered by Disqus

Copyright © 2019 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.