Geomaterials

Volume 8, Issue 4 (October 2018)

ISSN Print: 2161-7538   ISSN Online: 2161-7546

Google-based Impact Factor: 0.58  Citations  

Experiments and 3D DEM of Triaxial Compression Tests under Special Consideration of Particle Stiffness

HTML  XML Download Download as PDF (Size: 1326KB)  PP. 39-62  
DOI: 10.4236/gm.2018.84004    1,373 Downloads   3,997 Views  Citations

ABSTRACT

Discrete element modelling is commonly used for particle-scale modelling of granular or particulate materials. Developing a DEM model requires the determination of a number of micro-structural parameters, including the particle contact stiffness and the particle-particle friction. These parameters cannot easily be measured in the laboratory or directly related to measurable, physical material parameters. Therefore, a calibration process is typically used to determine the values for use in simulations of physical systems. This paper focuses on how to define the particle stiffness for the discrete element modelling in order to perform realistic simulations of granular materials in the case of linear contact model. For that, laboratory tests and numerical discrete element modelling of triaxial compression tests have been carried out on two different non-cohesive soils i.e. poorly graded fine sand and gap graded coarse sand. The results of experimental tests are used to calibrate the numerical model. It is found that the numerical results are qualitatively and quantitatively in good agreement with the laboratory tests results. Moreover, the results show that the stress dependent of soil behaviour can be reproduced well by assigning the particle stiffness as a function of the particle size particularly for gap graded soil.

Share and Cite:

Ahlinhan, M. , Houehanou, E. , Koube, M. , Doko, V. , Alaye, Q. , Sungura, N. and Adjovi, E. (2018) Experiments and 3D DEM of Triaxial Compression Tests under Special Consideration of Particle Stiffness. Geomaterials, 8, 39-62. doi: 10.4236/gm.2018.84004.

Cited by

[1] Multi-scale investigation of the performance of demolition wastes using numerical analysis and experimental methods
2022
[2] Seismic stability analysis of arch dam abutment based on full structural surface yield method
2021
[3] Calibration of discrete element parameters of crop residues and their interfaces with soil
2021
[4] Modeling Triaxial Testing with Flexible Membrane to Investigate Effects of Particle Size on Strength and Strain Properties of Cohesionless Soil
2021
[5] The mechanical behaviour of gravel-rubber mixtures: insights from dem numerical investigations.
2021
[6] Discrete Element Modelling of Undrained Consolidated Triaxial Test on Cohesive Soils
2020
[7] 基于三维离散元方法探究奥克托今颗粒落锤撞击点火机理
2019
[8] 3D Finite element analyses of suction caisson foundations for offshore wind turbines in drained sand
International Journal of Geotechnical Engineering, 2019
[9] Use of particulate mechanics concept in agricultural and geotechnical engineering applications
2019
[10] DISCRETE ELEMENT MODEL PARAMETERS TO SIMULATE SLOPE MOVEMENTS
International Journal of GEOMATE, 2019
[11] Three-dimensional discrete element technology investigated ignition mechanism of octahydro-1, 3, 5, 7-tetranitro-1, 3, 5, 7-tetrazocine particles under drop …
2019

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.