Author(s)

Greg Poole

Industrial Tests, Inc., Pilot Hill, CA, USA.

The Sun’s slow periodic flux transfer to the Earth, the low frequency of Schumann Resonance, and the fixed DC voltage of the capacitor direct us toward direct current (DC) machines for electrical modeling purposes. The Earth exhibits dual characteristics of a motor generator set by motoring the mechanical Earth around its axis, while at the same time generating energy for its spherical capacitor. It follows that electrical and mechanical output of the Earth are powered by the magnitude of the flux transfer events, the constant DC voltage supply and any potential nuclear contribution within the core. Like an induction furnace, powerful magnetic flux from the Sun partially melts the outer iron core of the Earth and magnetizes the inner solid iron core. The solid inner magnetic core acts as a rotating armature similar to a DC machine. All electrical machines experience no load and full load power loss while in operation. Speed control of large rotating DC machines is well understood and has been applied in industry for over a century. Speed can be changed either by varying the field resistance and/or the armature resistance. The characteristic of a constant speed DC machine is such that a change in field resistance will cause a compensatory change in armature resistance to maintain velocity. In the case of the earth, a decrease in armature resistance results in an increase in volume of the iron core, which may result in greater seismic and volcanic activity. Climate change may be the direct result of changes in soil and sea water resistance, which we lump together as field resistance.

Climate Change, Seismic Activity, Shunt Wound DC Machine, Speed Control, Tectonics, Volcano

Poole, G. (2018) Dynamo Speed Control and Tectonics—Modeling Earth as a Shunt Wound DC Machine. Journal of High Energy Physics, Gravitation and Cosmology, 4, 152-165. doi: 10.4236/jhepgc.2018.41014.