Author(s)

Koichi Watanabe^*, Yuji Ohya, Takanori Uchida, Tomoyuki Nagai

Research Institute for Applied Mechanics, Kyushu University, Fukuoka, Japan.

The offshore turbine system was installed on a floating platform moored in Hakata Bay, offshore of Fukuoka, Japan. An identical turbine system was also installed at the adjacent waterfront. The separation of the two turbines was 3.7 km. Wind flow tends to be more stable and the average wind speed is often larger in offshore areas than adjacent land areas at typical wind turbine hub height. This study focused on the wind condition of a nearshore area to clarify the advantages of nearshore wind farming. Prior to field experiment, wind conditions were predicted by using numerical simulation. It is useful for estimating topographical effect in nearshore areas. Next, field verification test was done by directly comparing wind data obtained from the identical wind turbine systems installed at an offshore location and the adjacent waterfront over the same extended period. The corresponding power output of these turbines was also compared. The data set exhibits 23% larger annual average wind speed at the offshore location and smaller turbulent intensity, resulting doubled annual power production.

Wind Turbine, Nearshore, Floating Platform, Wind Lens, Field Experiment, CFD

Watanabe, K. , Ohya, Y. , Uchida, T. and Nagai, T. (2017) Numerical Prediction and Field Verification Test of Wind-Power Generation Potential in Nearshore Area Using a Moored Floating Platform. Journal of Flow Control, Measurement & Visualization, 5, 21-35. doi: 10.4236/jfcmv.2017.52002.