[1]
|
Characterization of a Careya Arborea Bast Fiber as Potential Reinforcement for Light Weight Polymer Biodegradable Composites
|
|
Journal of Natural Fibers,
2023 |
|
|
[2]
|
Applications of natural and synthetic fiber reinforced polymer in infrastructure: A suitability assessment
|
|
Journal of Building …,
2023 |
|
|
[3]
|
Extraction and Characterization of Novel Natural Fiber from Cryptostegia Grandiflora as a Potential Reinforcement in Biocomposites
|
|
Journal of Natural …,
2023 |
|
|
[4]
|
Microencapsulation based fire retardant eco-friendly jute composite
|
|
Polymers and …,
2023 |
|
|
[5]
|
Alternative Natural Fibers for Biocomposites
|
|
Natural Fibers to Composites,
2023 |
|
|
[6]
|
3D Natural Fiber Reinforced Composites
|
|
Natural Fibers to Composites,
2023 |
|
|
[7]
|
Investigations on Tribological Performance of Sisal Fiber Reinforced Polypropylene Composites
|
|
Momona Ethiopian Journal of Science,
2022 |
|
|
[8]
|
Introduction to plant fibers and their composites
|
|
Plant Fibers, their …,
2022 |
|
|
[9]
|
Applications of Natural Fibers–Reinforced Composites (I)
|
|
Natural Fiber Composites,
2022 |
|
|
[10]
|
THERMORESPONSIVE, SHORT ELECTROSPUN FIBRE SPONGES FOR APPLICATION IN ROOF TOP AIR-WATER HARVESTING
|
|
2022 |
|
|
[11]
|
Pellets Biocompósitos Para Impressão 3D Através de Extrusão Direta| Biocomposite Pellets For Direct Extrusion-Based 3D Printing
|
|
2022 |
|
|
[12]
|
Synthesis and surface treatments of bio-based fibers
|
|
Advances in Bio-Based Fiber,
2022 |
|
|
[13]
|
Materiales compuestos reforzados con fibras de fique-revisión
|
|
Suarez, E Córdoba-Tuta - Revista UIS Ingenierías,
2022 |
|
|
[14]
|
Effect of Open Hole on Tensile Properties of Kenaf/Epoxy Composite via ANSYS Simulation
|
|
2022 |
|
|
[15]
|
aApplied Mechanics and Structure Safety Key Laboratory of Sichuan Province, School of Mechanics and Engineering, Southwest Jiaotong University, Chengdu …
|
|
… Treatment Methods of Natural Fibres and …,
2022 |
|
|
[16]
|
Isolation of Sunn Hemp fiber by microwave irradiation and its effect on reinforced epoxy composite for electrical application
|
|
Materials Today: Proceedings,
2022 |
|
|
[17]
|
Enhancing of clay composites mechanical properties by the addition of natural fibers and carbon nanomaterials
|
|
García, JM Ambriz-Torres… - MRS Advances,
2022 |
|
|
[18]
|
Physicochemical characterization of lignocellulose fibers obtained from seedpods of Wrightia tinctoria plant
|
|
AIMS Materials Science,
2022 |
|
|
[19]
|
Electrical Properties of Synthetic Fiber/Epoxy Composites
|
|
Handbook of Epoxy/Fiber …,
2022 |
|
|
[20]
|
Sustainable Materials for Advanced Products
|
|
Handbook of Sustainability Science in the …,
2022 |
|
|
[21]
|
A NEW PEACH PALM FIBER MAT FOR POLYURETHANE MATRIX COMPOSITES: BEHAVIOR TO UV-ACCELERATED WEATHERING
|
|
CELLULOSE …,
2022 |
|
|
[22]
|
A Comprehensive Review on Natural Fiber Reinforced Polymer Composites and Its Applications
|
|
Trends in Applications of Polymers and …,
2022 |
|
|
[23]
|
Maximum Bending Stress Analysis of Jute/Epoxy and Glass/Epoxy Polymer Composites
|
|
… Journal of Integrated …,
2022 |
|
|
[24]
|
Simulations of composite material blended with thermoplasitc and jute fabric
|
|
Materials Today: Proceedings,
2022 |
|
|
[25]
|
Review of Oil Palm Mesocarp Fiber (OPMF) Mechanical and Chemical Properties Improvement to Develop Environment Friendly Material
|
|
Materials Science …,
2022 |
|
|
[26]
|
Advanced Industrial and Engineering Polymer Research
|
|
2022 |
|
|
[27]
|
Sustainable soil stabilization: the use of waste materials to improve the engineering properties of soft soils
|
|
Inżynieria Bezpieczeństwa Obiektów …,
2022 |
|
|
[28]
|
Mechanical characterization of areca fine fiber fabric (AFFF) reinforced epoxy composites
|
|
Materials Today: Proceedings,
2022 |
|
|
[29]
|
Micromechanical Analysis of a Bio-Sandwich Application for Cylinder under Pressure
|
|
Journal of Composites …,
2022 |
|
|
[30]
|
Sandwich Composites from Recycled Plastic Bottles Combined with Epoxy Matrix and Fique Fabric
|
|
Journal of Natural Fibers,
2022 |
|
|
[31]
|
Compressive Strength of Floor Tile Composites from Recycled PET Reinforced with Natural Fibers
|
|
Journal of Natural …,
2022 |
|
|
[32]
|
Flame retardant characteristics of polymerized dopamine hydrochloride coated jute fabric and jute fabric composites
|
|
Journal of the Serbian Chemical Society,
2022 |
|
|
[33]
|
Manufacturing technology and dynamic mechanical investigation of moisture‐resistant Luffa cylindrica‐reinforced epoxy composites
|
|
Journal of Applied …,
2022 |
|
|
[34]
|
Ultrasound-mediated pectin extraction from pseudostem waste of Musa balbisiana: a resource from banana debris
|
|
Polymer Bulletin,
2022 |
|
|
[35]
|
Development of wheat husk biosilica and characterization of its areca reinforced polyester composite
|
|
Biomass Conversion and …,
2022 |
|
|
[36]
|
Physical, Mechanical, and Environmental Properties of Corn Stalk Fiber Reinforced Braking Composites Prepared by Wet Granulation
|
|
Journal of Natural …,
2022 |
|
|
[37]
|
Recent developments in composite reinforcement using date palm fibers for improved performance through physical and chemical modifications
|
|
International Journal of Polymer Analysis and …,
2022 |
|
|
[38]
|
Cellulosic Fabric-Reinforced Cementitious Matrix (FRCM): Ligaments, Treatments, and Employment
|
|
Ramos… - Materials Circular …,
2022 |
|
|
[39]
|
Free Vibration of Flax Braided Fabric PLA Beam under Edge Compression
|
|
Journal of Natural Fibers,
2022 |
|
|
[40]
|
Morphological, Structural and Thermal Properties of Silane-treated Date Palm Fibers
|
|
Journal of Natural Fibers,
2022 |
|
|
[41]
|
Optimization on the Mechanical Properties of Aluminium 8079 Composite Materials Reinforced with PSA
|
|
Advances in Materials …,
2022 |
|
|
[42]
|
Experimental investigation on mechanical properties and free vibration characteristics of epoxy‐based glass/flax laminates
|
|
Polymer Composites,
2022 |
|
|
[43]
|
Characterization of Wheat Straw Fiber Grown Around Jimma Zone, ETHIOPIA
|
|
Journal of Natural …,
2022 |
|
|
[44]
|
Effect of alkali treated and untreated cellulose fibers and human hair on FTIR and tensile properties for composite material applications
|
|
SN Applied Sciences,
2022 |
|
|
[45]
|
Extraction and characterization of Hibiscus Macrantus bast fibers as a reinforcement material for composite application
|
|
Polymer Bulletin,
2022 |
|
|
[46]
|
Experimental study on mechanical behaviour of linen/epoxy and linen/hemp/epoxy hybrid polymer composite
|
|
Materials Today …,
2022 |
|
|
[47]
|
Applications of Machine Learning in the Field of Polymer Composites
|
|
Machine Learning Applied to Composite …,
2022 |
|
|
[48]
|
Approaches of material selection, alignment and methods of fabrication for natural fiber polymer composites: A review
|
|
Journal of Applied and …,
2022 |
|
|
[49]
|
Natural fibre composites–an alternative to plastics in the automotive industry: A review
|
|
Proceedings of the …,
2022 |
|
|
[50]
|
Mechanical Properties of Natural as well as Synthetic Fiber Reinforced Concrete: A Review
|
|
Construction and Building Materials,
2022 |
|
|
[51]
|
Mechanical and Rheological Properties of Bamboo Pulp Fiber Reinforced High Density Polyethylene Composites: Influence of Nano CaCO3 Treatment and …
|
|
Journal of …,
2022 |
|
|
[52]
|
Mechanical and thermal analysis of coir fiber reinforced jute/bamboo hybrid epoxy composites
|
|
Polymer …,
2022 |
|
|
[53]
|
Hollow carbon fibers and flakes derived from Calotropis procera as adsorbents for dye removal from aqueous solutions
|
|
Enizi, HA Altaleb, NB AlAnazi… - Materials Chemistry and …,
2022 |
|
|
[54]
|
Influence of filler material on properties of fiber-reinforced polymer composites: A review
|
|
e-Polymers,
2022 |
|
|
[55]
|
Effect of hybridization on physio-mechanical behavior of Vetiver and Jute fibers reinforced epoxy composites for structural applications: Studies on fabrication …
|
|
Journal of Industrial …,
2022 |
|
|
[56]
|
Influence of Filler Materials on Wettability and Mechanical Properties of Basalt/E-Glass Woven Fabric–Reinforced Composites for Microfluidics
|
|
Micromachines,
2022 |
|
|
[57]
|
Plant-Oil-Based Fibre Composites for Boat Hulls. Materials 2022, 15, 1699
|
|
2022 |
|
|
[58]
|
Thermal characterization of epoxy bilayer hybrid composites reinforced with kenaf and oil palm fibers
|
|
Polymer …,
2022 |
|
|
[59]
|
A comprehensive review of various factors for application feasibility of natural fiber-reinforced polymer composites
|
|
Results in …,
2022 |
|
|
[60]
|
Optimization of tribological performance of natural fibers/epoxy composites using ANOVA & TOPSIS approach
|
|
Materials Today …,
2022 |
|
|
[61]
|
Effect of Surface Treatment on the Mechanical Performance of Unidirectional Enset Fiber Reinforced Polypropylene Composite
|
|
Journal of Natural …,
2022 |
|
|
[62]
|
Investigation on Elastic Constants of Microfibril Reinforced Poly Vinyl Chloride Composites Using Impulsive Excitation of Vibration
|
|
Polymers,
2022 |
|
|
[63]
|
Improvement of Mechanical, Thermal, and Physical Behaviors of Jute/Cotton Biocomposites Reinforced by Spent Tea Leaf Particles
|
|
Journal of Composites …,
2022 |
|
|
[64]
|
Maximum Flexural Stress Analysis of Hemp/Epoxy and Glass/Epoxy Polymer Composite via ANSYS Simulation
|
|
2022 |
|
|
[65]
|
Investigation of Woven Orientation of Natural Fiber by Finite Element Method
|
|
Journal of Advanced Mechanical …,
2022 |
|
|
[66]
|
Design and Analysis of Sedan Car B‐pillar Outer Panel Using Abirbara with S‐glass Fiber Hybrid Composites
|
|
Light Weight …,
2022 |
|
|
[67]
|
Study on Impact Properties of Hybrid Composites Fabricated by VARTM Process for Structural Applications
|
|
Recent Advances in …,
2022 |
|
|
[68]
|
Advancements in Biofibers and Biopolymers for Biocomposites
|
|
Journal of Fibers and Polymer …,
2022 |
|
|
[69]
|
Effect of Mass Addition on Physical Properties and Mechanical Properties of Agave Sisalana Fiber Composites-Epoxy
|
|
Journal of Technomaterial Physics Vol,
2022 |
|
|
[70]
|
Furação em compósito de fibras do caule da bananeira e poliuretano derivado do óleo de mamona
|
|
2022 |
|
|
[71]
|
Analyse du composite à fibres végétales renforcé par des nanoparticules
|
|
2022 |
|
|
[72]
|
РОЗРОБКА БІОКОМПОЗИТІВ, НАПОВНЕНИХ ПРОДУКТАМИ ПЕРЕРОБКИ ВТОРИННОЇ СИРОВИНИ РОСЛИННОГО ПОХОДЖЕННЯ
|
|
Вісник Вінницького …,
2022 |
|
|
[73]
|
Sustainable protein fibres 9
|
|
Sustainable Fibres for Fashion and Textile …,
2022 |
|
|
[74]
|
Extraction and characterization of cellulosic fibers from the stem of papaya tree (Carica papaya L.)
|
|
Cellulose Fibre Reinforced …,
2022 |
|
|
[75]
|
Hierarchical Model for Optimizing Natural Fiber Selection Process for Eco-design of Buildings
|
|
Journal of Natural Fibers,
2022 |
|
|
[76]
|
Drilling of natural fiber-reinforced based polyurethane foam composite
|
|
Journal of …,
2022 |
|
|
[77]
|
Modelling creep responses of plantain fibre reinforced HDPE (PFRHDPE) for elevated temperature applications
|
|
Advanced Industrial and …,
2022 |
|
|
[78]
|
Abrasive Water Jet Machining of Coir Fiber Reinforced Epoxy Composites:-A Review
|
|
Functional …,
2022 |
|
|
[79]
|
Microwave Hybrid Heating for Moulding of Sisal/Jute/HDPE Composites
|
|
Journal of Natural Fibers,
2022 |
|
|
[80]
|
Antimicrobial Properties of Plant Fibers
|
|
Mendoza, E Guamba, K Miño, MP Romero… - Molecules,
2022 |
|
|
[81]
|
A review on natural fibers and mechanical properties of banyan and banana fibers composites
|
|
Materials Today …,
2022 |
|
|
[82]
|
Plant-oil-based fibre composites for boat hulls
|
|
Materials,
2022 |
|
|
[83]
|
Evaluation of impact, thermo‐physical properties, and morphology of cornhusk fiber‐reinforced polyester composites
|
|
Polymer …,
2022 |
|
|
[84]
|
Waste coconut leaf sheath as reinforcement composite material with phenol‐formaldehyde matrix
|
|
Polymer …,
2022 |
|
|
[85]
|
Development and characterization of Hevea brasiliensis particulates filled polyethylene composites
|
|
Polymer …,
2022 |
|
|
[86]
|
Advances in computational intelligence of polymer composite materials: machine learning assisted modeling, analysis and design
|
|
… Methods in Engineering,
2022 |
|
|
[87]
|
Process parameter optimization in laser cutting of coir fiber reinforced epoxy composite-a review
|
|
Materials Today …,
2022 |
|
|
[88]
|
Concrete reinforced with sisal fibers (SSF): overview of mechanical and physical properties
|
|
Crystals,
2022 |
|
|
[89]
|
Towards widespread properties of cellulosic fibers composites: A comprehensive review
|
|
Journal of …,
2022 |
|
|
[90]
|
Recent advances in eco-friendly composites derived from lignocellulosic biomass for wastewater treatment
|
|
Biomass Conversion and …,
2022 |
|
|
[91]
|
A review on natural fibre-reinforced biopolymer composites: properties and applications
|
|
International Journal of …,
2022 |
|
|
[92]
|
Evaluation of mechanical, thermal and morphological properties of corn husk modified pumice powder reinforced polyester composites
|
|
Polymer …,
2022 |
|
|
[93]
|
Water absorption behavior of oil palm empty fruit bunch (OPEFB) and oil palm kernel shell (OPKS) as fillers in acrylic thermoplastic composites
|
|
Naranjo, V Valle, A Aguilar, F Cadena… - Materials,
2022 |
|
|
[94]
|
Long-Term Water Absorption of Hybrid Flax Fibre-Reinforced Epoxy Composites with Graphene and Its Influence on Mechanical Properties
|
|
Polymers,
2022 |
|
|
[95]
|
Evaluation on mechanical properties of high‐performance biocomposite bridge deck structure: a review
|
|
Polymer Composites,
2021 |
|
|
[96]
|
Natural fibre filament for Fused Deposition Modelling (FDM): A review
|
|
International Journal …,
2021 |
|
|
[97]
|
A Comprehensive Review on Natural Fibers: Technological and Socio-Economical Aspects
|
|
Polymers,
2021 |
|
|
[98]
|
INTRODUCTION TO FIBER-REINFORCED POLYMERS
|
|
Fiber-Reinforced Polymers,
2021 |
|
|
[99]
|
Green, Natural Fibre and Hybrid Composites
|
|
2021 |
|
|
[100]
|
Trends and Developments in Natural Fiber Composites
|
|
2021 |
|
|
[101]
|
Physical and Mechanical Properties of Natural Leaf Fiber-Reinforced Epoxy Polyester Composites
|
|
2021 |
|
|
[102]
|
Enhancement of the Dynamic Mechanical and Dielectric Properties of Prosopis juliflora Fiber-Reinforced Composites by Fiber Modification
|
|
2021 |
|
|
[103]
|
Natural Fibre-Reinforced Composite for Ballistic Applications: A Review
|
|
2021 |
|
|
[104]
|
A review on extraction, chemical treatment, characterization of natural fibers and its composites for potential applications
|
|
Polymer …,
2021 |
|
|
[105]
|
Critical review of natural fiber reinforced hybrid composites: Processing, properties, applications and cost
|
|
Polymers,
2021 |
|
|
[106]
|
An overview: characterization of natural fiber reinforced hybrid composites
|
|
World Journal of …,
2021 |
|
|
[107]
|
Injection-molded natural fiber-reinforced polymer composites–a review
|
|
International Journal of Mechanical and …,
2021 |
|
|
[108]
|
A review of interfacial bonding mechanism of bamboo fiber reinforced polymer composites
|
|
Cellulose,
2021 |
|
|
[109]
|
Production and characterization of palm oil based epoxy biocomposite by RSM design
|
|
Hittite Journal of Science and …,
2021 |
|
|
[110]
|
Treatment of Natural Fiber for Application in Concrete Pavement
|
|
2021 |
|
|
[111]
|
Life cycle analysis for green composites: A review of literature including considerations for local and global agricultural use
|
|
2021 |
|
|
[112]
|
Natural Fiber Composite for Structural Applications
|
|
2021 |
|
|
[113]
|
Effect of heat treatment on the mechanical properties of jute yarns
|
|
2021 |
|
|
[114]
|
Comparative Analysis of Different Composites for Ankle Foot Orthosis: A Review
|
|
Advances in Engineering Materials,
2021 |
|
|
[115]
|
Thermal analysis of chicken fiber augmented epoxy composites
|
|
2021 |
|
|
[116]
|
Ethiopian Sisal fiber and Unsaturated Polyester Composite Panel a Fabrication to Characterize Flexural Properties for Future Opportunities in Car Body Applications
|
|
2021 |
|
|
[117]
|
Mechanical characterization of plant fortified fiber polymer composites
|
|
2021 |
|
|
[118]
|
CHARACTERIZATION OF POLYLACTIDE (PLA) COMPOSITE REINFORCED WITH BIOWASTE
|
|
2021 |
|
|
[119]
|
Mechano-chemically activated fly-ash and sisal fiber reinforced PP hybrid composite with enhanced mechanical properties
|
|
2021 |
|
|
[120]
|
Opportunity of Non-Wood Forest Products in Biocomposites
|
|
2021 |
|
|
[121]
|
Banana leaf fiber-based green composite: An explicit review report
|
|
2021 |
|
|
[122]
|
Extraction, Treatment and Applications of Natural Fibers for Bio-Composites–A Critical Review
|
|
2021 |
|
|
[123]
|
Moving towards the era of bio fibre based polymer composites
|
|
2021 |
|
|
[124]
|
Enhanced biohydrogen production from corn straw by basalt fiber addition
|
|
2021 |
|
|
[125]
|
A review on mechanical properties of natural fiber reinforced polymer (NFRP) composites
|
|
2021 |
|
|
[126]
|
Development and characterization of biodegradable composite film
|
|
2021 |
|
|
[127]
|
Drug‐Eluting Medical Textiles: From Fiber Production and Textile Fabrication to Drug Loading and Delivery
|
|
2021 |
|
|
[128]
|
Recent Advances in Fiber–Hydrogel Composites for Wound Healing and Drug Delivery Systems
|
|
2021 |
|
|
[129]
|
Tensile behavior of lotus natural fiber and e-glass fibers reinforced with epoxy composites
|
|
2021 |
|
|
[130]
|
Thermal and wear properties of sansevieria trifasciata green fiber–carbon fiber polymer hybrid composite
|
|
2021 |
|
|
[131]
|
Manufacturing and characterization of novel silicone/natural fabric/graphene‐based functional composites for human body motion sensing
|
|
2021 |
|
|
[132]
|
Fabrication and Characterization of Hybrid Polymer Matrix Composite Reinforced with Nettle, Sisal and Glass Fiber
|
|
2021 |
|
|
[133]
|
Development of Jute Hybrid Composites for use in the Car Panels
|
|
Global Journal of Engineering Sciences,
2021 |
|
|
[134]
|
Mechanical properties of epoxy hybrid composites reinforced with agave fiber and zinc powder
|
|
2021 |
|
|
[135]
|
Using Wheat and Barely Legs for Manufacturing Multi-Applications Composite Material
|
|
2021 |
|
|
[136]
|
Recent advances in Nanocellulose-based different Biomaterials: Types, Properties, and Emerging Applications
|
|
2021 |
|
|
[137]
|
Design and Analysis of Sedan Car B-Pillar Outer Panel Using Abirbara with S-Glass Fiber Hybrid Composites
|
|
2021 |
|
|
[138]
|
Raw and chemically treated bio‐waste filled (Limonia acidissima shell powder) vinyl ester composites: Physical, mechanical, moisture absorption properties, and …
|
|
2021 |
|
|
[139]
|
Characterization of mechanical properties of natural fibre reinforced polymer composite using horizontal and vertical kenaf fibre orientation
|
|
2021 |
|
|
[140]
|
Gas permeability of composites with cellulosic fillers
|
|
2021 |
|
|
[141]
|
Flammability, Tensile, and Morphological Properties of Oil Palm Empty Fruit Bunches Fiber/Pet Yarn-Reinforced Epoxy Fire Retardant Hybrid Polymer Composites
|
|
2021 |
|
|
[142]
|
Nanofibrillated Cellulose Based Bio-phenolic Composites
|
|
2021 |
|
|
[143]
|
Effect of Fibers Orientation on the Fracture of Polymer Concrete Based on Quartz, Polyester and Jute Fabrics
|
|
2021 |
|
|
[144]
|
A review of natural fiber composites: Extraction methods, chemical treatments and applications
|
|
2021 |
|
|
[145]
|
Developments in Chemical Treatments, Manufacturing Techniques and Potential Applications of Natural-Fibers-Based Biodegradable Composites
|
|
2021 |
|
|
[146]
|
A study about silane modification and interfacial ultraviolet aging of hemp fiber reinforced polypropylene composites
|
|
2021 |
|
|
[147]
|
Interlaminar Shear Strength (ILSS) Characterization of Fiber Metal Laminates (FMLs) manufactured through VARTM Process
|
|
2021 |
|
|
[148]
|
Refining of Banana Fiber for Load Bearing Application through Emulsion Treatment and Its Comparison with Other Traditional Methods
|
|
2021 |
|
|
[149]
|
Environment friendly, renewable and sustainable poly lactic acid (PLA) based natural fiber reinforced composites–A comprehensive review
|
|
2021 |
|
|
[150]
|
Impact of the Jatoba shell residue amount on polyurethane foams based on castor polyol
|
|
2021 |
|
|
[151]
|
Effectof sisal fiber (Agavesisalana) andsurfacetreatmenton transverse strength in acrylic resin denture base repair
|
|
2021 |
|
|
[152]
|
Review on Banana Fibre-Reinforced Composites
|
|
2021 |
|
|
[153]
|
NATURAL FIBER REINFORCED BIO-BASED MATRIX FOR PACKAGING APPLICATION: A REVIEW
|
|
Conference Paper,
2021 |
|
|
[154]
|
Tensile attributes and material analysis of kevlar and date palm fibers reinforced epoxy composites for automotive bumper applications
|
|
2021 |
|
|
[155]
|
Assessment of alkaline treatment of palm kernel fiber and curing duration on selected properties of cement-paper composite boards
|
|
2021 |
|
|
[156]
|
Erosive wear behavior of bio-waste particulate-reinforced epoxy composites for low cost applications
|
|
2021 |
|
|
[157]
|
Mechanical and Dynamic Properties of Ramie Fiber-Reinforced Composites
|
|
2021 |
|
|
[158]
|
A Review on Green Composites Based on Natural Fiber-Reinforced Polybutylene Succinate (PBS)
|
|
2021 |
|
|
[159]
|
Study on Dielectric and charge transport behavior in alkali-treated randomly oriented Sunn Hemp Fiber Reinforced epoxy composite in connection with the …
|
|
2021 |
|
|
[160]
|
Serat Alam Sebagai Bahan Komposit Ramah Lingkungan, Suatu Kajian Pustaka
|
|
Jurnal Inovasi dan …,
2021 |
|
|
[161]
|
Development of Guinea Corn Husk-Cow Hair Hybrid Fibre Reinforced Cement Composite
|
|
Journal of Building …,
2021 |
|
|
[162]
|
Pengaruh minyak zippo pada kecepatan rambatan api dan residu dari komposit epoksi dengan penguat serat jute
|
|
Dinamika Teknik Mesin …,
2021 |
|
|
[163]
|
Experimental Characterization of Masonry Panels Strengthened with NFRCM
|
|
Key Engineering …,
2021 |
|
|
[164]
|
Effect of thermal treatment on mechanical properties of sustainable composite: Experimental and simulation study
|
|
Compos. Theory …,
2021 |
|
|
[165]
|
Positive psychological capital as a predictor of satisfaction with the fly-in fly-out model
|
|
Frontiers in …,
2021 |
|
|
[166]
|
Cactus Based Solids
|
|
2021 |
|
|
[167]
|
MECHANICAL PROPERTIES CHARACTERIZATION OF HYBRID COMPOSITE MATERIALS MADE FROM MALVA VERTICILLATA AND NETTLE FIBER …
|
|
2021 |
|
|
[168]
|
Pre-Proof
|
|
2021 |
|
|
[169]
|
Investigations of Process Parameters in Vacuum Assisted Resin Transfer Molding for the Development of Fiber Reinforced Composites
|
|
2021 |
|
|
[170]
|
Mechanical and Dynamic Properties of Kenaf‐Fiber‐Reinforced Composites
|
|
Mechanical and Dynamic …,
2021 |
|
|
[171]
|
Sustainable Natural Bio-composites and its Applications
|
|
Recent Advances in Smart Manufacturing and …,
2021 |
|
|
[172]
|
Current strategies for the production of sustainable biopolymer composites
|
|
Polymers,
2021 |
|
|
[173]
|
Surface Modifications of Natural Fibers for use in Preparation of Biocomposites
|
|
SAMRIDDHI: A Journal of Physical …,
2021 |
|
|
[174]
|
Light Weight Materials: Processing and Characterization
|
|
2021 |
|
|
[175]
|
Characterisation and development of new bio-filler using mimusops elengi seed shell powder for polypropylene composites
|
|
2020 |
|
|
[176]
|
Evaluation on tensile strength of banana stem fiber using acid treatment.
|
|
2020 |
|
|
[177]
|
Computational Analysis of Hybrid Composite Material for Wing Frontal Spar
|
|
… Journal of Vehicle …,
2020 |
|
|
[178]
|
WEIGHTING THE MATERIAL REQUIREMENTS OF NFRC BY USING FUZZY AHP WITH EXTENT ANALYSIS
|
|
Journal of Advanced Manufacturing Technology (JAMT),
2020 |
|
|
[179]
|
Computational Analysis of Hybrid Composite Material for Wing Frontal Spar.
|
|
2020 |
|
|
[180]
|
Effect of Chemical Treatment on Tensile Properties of Oil Palm Empty Fruit Bunch (OPEFB)-based All Cellulose Composite (ACC) Films
|
|
2020 |
|
|
[181]
|
Recent Progress in Hybrid Biocomposites: Mechanical Properties, Water Absorption, and Flame Retardancy
|
|
2020 |
|
|
[182]
|
Effect of natural filler materials on fiber reinforced hybrid polymer composites: An Overview
|
|
2020 |
|
|
[183]
|
Methyl methacrylate (MMA) treatment of empty fruit bunch (EFB) to improve the properties of regenerated cellulose biocomposite films
|
|
2020 |
|
|
[184]
|
Biomass derived fibers as a substitute to synthetic fibers in polymer composites
|
|
2020 |
|
|
[185]
|
Sustainable and renewable bio-based natural fibres and its application for 3D printed concrete: a review
|
|
2020 |
|
|
[186]
|
Characterization of Chemically Treated Limonia Acidissima (Wood Apple) Shell Powder: Physicochemical, Thermal, and Morphological Properties
|
|
2020 |
|
|
[187]
|
Research paper dry sliding wear and surface morphological examination of an aluminium matrix composite reinforced with palm kernel shell
|
|
2020 |
|
|
[188]
|
Experimental analysis, predictive modelling and optimization of some physical and mechanical properties of aluminium 6063 alloy based composites reinforced with …
|
|
2020 |
|
|
[189]
|
بررسی تجربی تأثیر آسیب های داخلی بر روی مقاومت بالستیکی مواد مرکب لایه ای
|
|
Muhandisī-i mikānīk-i īrān. sīstimhā-yi dīnāmīkī va mikānīk-i jāmidāt,
2020 |
|
|
[190]
|
ДОСЛІДЖЕННЯ ВЛАСТИВОСТЕЙ БІОКОМПОЗИТІВ, НАПОВНЕНИХ ВИСОКОДИСПЕРНИМ ПОРОШКОМ КРОХМАЛЮ
|
|
2020 |
|
|
[191]
|
Potential of Syngonanthus nitens fiber as a reinforcement in epoxy composite and its mechanical characterization
|
|
2020 |
|
|
[192]
|
XPS and FTIR Studies of DC Reactive Magnetron Sputtered TiO2 Thin Films on Natural Based-Cellulose Fibers
|
|
2020 |
|
|
[193]
|
Fabrication of Automobile Component Using Hybrid Natural Fiber Reinforced Polymer Composite
|
|
2020 |
|
|
[194]
|
Eco-friendly, bio-degradable and compostable plates from areca leaf
|
|
2020 |
|
|
[195]
|
Experimental investigation on mechanical properties of banana/snake grass fiber reinforced hybrid composites
|
|
2020 |
|
|
[196]
|
Modelling Mullins Effect Induced by Chain Delamination and Reattachment
|
|
2020 |
|
|
[197]
|
A synergistic flame retardant of glycosyl cross-linking boron acid and ammonium salt of phytic acid to enhance durable flame retardancy of cotton fabrics
|
|
2020 |
|
|
[198]
|
Investigation on Mechanical Behavior of Sisal Fiber Reinforced Polylactic Acid and Sisal/Epoxy Composites
|
|
2020 |
|
|
[199]
|
Assessment of the mechanical properties of Peruvian Stipa Obtusa fibers for their use as reinforcement in composite materials
|
|
2020 |
|
|
[200]
|
A comprehensive study on electrospinning of poly (vinyl alcohol): effects of the TCD, applied voltage, flow rate and solution concentration
|
|
2020 |
|
|
[201]
|
Forecasting the Finest Firmness of Biocomposites using Response Surface Design Methodology
|
|
2020 |
|
|
[202]
|
Investigation on Mechanical Characteristics of Luffa Natural Fiber Reinforced Polymer Composite Materials.
|
|
2020 |
|
|
[203]
|
Acoustic and mechanical characterisation of polypropylene composites reinforced by natural fibres for automotive applications
|
|
2020 |
|
|
[204]
|
Characterization of mechanical behavior of pineapple leaf fiber composite
|
|
2020 |
|
|
[205]
|
Effect of grain size on the structure and properties of coir epoxy composites
|
|
2020 |
|
|
[206]
|
Physico-chemical and morphological evaluation of palm kernel shell particulate reinforced aluminium matrix composites
|
|
2020 |
|
|
[207]
|
Thermal, acoustic, and dielectric behavior of epoxy-based hybrid composites using short hair fiber
|
|
2020 |
|
|
[208]
|
Structural, thermal and mechanical properties of composites of poly (butylene adipate-co-terephthalate) with wheat straw microcrystalline cellulose
|
|
2020 |
|
|
[209]
|
Tensile Properties of Bamboo Fiber Filled with Rock Dust Filler Reinforced Hybrid Composites
|
|
2020 |
|
|
[210]
|
Immobilization of ferric tannate on wood fibers to functionalize wood fibers/diphenylmethane di-isocyanate composites
|
|
2020 |
|
|
[211]
|
RESEARCH PAPER DRY SLIDING WEAR AND SURFACE MORPHOLOGICAL EXAMINATION OF AN ALUMINIUM MATRIX COMPOSITE REINFORCED WITH …
|
|
2020 |
|
|
[212]
|
Kenaf fibre treatment and its impact on the static, dynamic, hydrophobicity and barrier properties of sustainable polystyrene biocomposites
|
|
2020 |
|
|
[213]
|
Hybrid Fiber Composites
|
|
2020 |
|
|
[214]
|
Natural Resources Based Green Composite Materials
|
|
2020 |
|
|
[215]
|
Investigation on Mechanical Characteristics of Luffa Natural Fiber Reinforced Polymer Composite Materials
|
|
2020 |
|
|
[216]
|
Modeling Material Properties of Natural Fiber-Polymer (Grain Bags) Composites
|
|
2020 |
|
|
[217]
|
The effect of fibre treatment on water absorption and mechanical properties of buri palm (Corypha utan) fibre reinforced epoxy composites
|
|
2020 |
|
|
[218]
|
Statement of Originality
|
|
2020 |
|
|
[219]
|
Processing and Modification of Starch into Thermoplastic Materials
|
|
2020 |
|
|
[220]
|
Application of Natural Colorants in Green Polyethylene Composites with Lignocellulosic Fillers: The Influence of Steam Sterilization on Mechanical Properties and …
|
|
2020 |
|
|
[221]
|
Scattering of elastic waves from a corrugated interface
|
|
2020 |
|
|
[222]
|
To Study effect of VARTM process parameters for composite strength: Taguchi approach
|
|
2020 |
|
|
[223]
|
A review on mechanical characterization of polymer matrix composites & its effects reinforced with various natural fibres
|
|
Materials Today: Proceedings,
2020 |
|
|
[224]
|
Advancement in materials for industrial safety helmets
|
|
2020 |
|
|
[225]
|
Introduction to Composite Materials
|
|
2020 |
|
|
[226]
|
Biofunctionalization of Natural Fiber-Reinforced Biocomposites for Biomedical Applications
|
|
2020 |
|
|
[227]
|
A new study on effect of various chemical treatments on Agave Americana fiber for composite reinforcement: Physico-chemical, thermal, mechanical and …
|
|
2020 |
|
|
[228]
|
Challenges on machining characteristics of natural fiber-reinforced composites–A review
|
|
2020 |
|
|
[229]
|
Microcrystalline cellulose treated by steam explosion and used for thermo-mechanical improvement of polypropylene
|
|
2020 |
|
|
[230]
|
Natural and Synthetic Fibers for Hybrid Composites
|
|
2020 |
|
|
[231]
|
Preparation and characterization of sodium silicate–treated jute-cotton blended polymer–reinforced UPR-based composite: effect of γ-radiation
|
|
2020 |
|
|
[232]
|
Emerging Natural Fiber-Reinforced Cement Materials and Technology for 3D Concrete Printing: A Review
|
|
2020 |
|
|
[233]
|
Fabrication and Characterization of Banana Fiber Reinforced Unsaturated Polyester Resin Based Composites
|
|
2020 |
|
|
[234]
|
Effects of length and content of natural cellulose fiber on the mechanical behaviors of phenol formaldehyde composites
|
|
2020 |
|
|
[235]
|
A novel approach for development of printed circuit board from biofiber based composites
|
|
2020 |
|
|
[236]
|
A comprehensive review on material selection for polymer matrix composites subjected to impact load
|
|
2020 |
|
|
[237]
|
Mechanical behavior of a composite material using a polyester matrix reinforced with Guadua angustifolia bamboo fibers
|
|
2020 |
|
|
[238]
|
Mechanical behaviour and microscopic analysis of epoxy and E-glass reinforced banyan fibre composites with the application of artificial neural network and deep …
|
|
2020 |
|
|
[239]
|
Bio-treatment of poplar via amino acid for interface control in biocomposites
|
|
2020 |
|
|
[240]
|
Recent Advances of Hybrid Fiber Composites for Various Applications
|
|
2020 |
|
|
[241]
|
Digital image correlation and acoustic emission for damage analysis during tensile loading of open-hole flax laminates
|
|
2020 |
|
|
[242]
|
Influence of Gamma Radiation on Mechanical Properties of Jute Fabric-Reinforced Polymer Composites
|
|
2020 |
|
|
[243]
|
Water Hyacinth for Biocomposites—An Overview
|
|
2020 |
|
|
[244]
|
Characterization of New Cellulosic Fibers Obtained from Zingiber Officinale
|
|
2020 |
|
|
[245]
|
Surface Modification of Bast-Based Natural Fibers through Environment Friendly Methods
|
|
2019 |
|
|
[246]
|
FABRICATION AND CHARACTERIZATION OF ACACIA TORTILIS NATURAL FIBER RENFORCED POLYMER COMPOSITE EXTRACTED FROM ACACIA …
|
|
2019 |
|
|
[247]
|
Lyophilized Protein Structures as an Alternative Biodegradable Material for Food Packaging
|
|
2019 |
|
|
[248]
|
New Lignocellulosic Aristida adscensionis Fibers as Novel Reinforcement for Composite Materials: Extraction, Characterization and Weibull Distribution Analysis
|
|
2019 |
|
|
[249]
|
Review of natural fiber-reinforced engineering plastic composites, their applications in the transportation sector and processing techniques
|
|
2019 |
|
|
[250]
|
Tribological Properties of Calotropis Procera Natural Fiber Reinforced Hybrid Epoxy Composites
|
|
2019 |
|
|
[251]
|
Mechanical Properties of Banana Fibers Reinforced Polyester Composite
|
|
2019 |
|
|
[252]
|
Mechanical Properties of Woven Carbon Fiber/Kenaf Fabric Reinforced Epoxy Matrix Hybrid Composites
|
|
2019 |
|
|
[253]
|
MECHANICAL AND THERMAL PROPERTIES OF GRAPHENE OXIDE REINFORCED POLYPROPYLENE/PINEAPPLE LEAVES FIBRE COMPOSITES
|
|
PERINTIS eJournal,
2019 |
|
|
[254]
|
Antimicrobial Natural Cellulose Fibers from Hyptis suaveolens for Potential Biomedical and Textiles Applications
|
|
2019 |
|
|
[255]
|
Bagasse sugarcane fibers as reinforcement agents for natural composites: description and polymer composite applications
|
|
2019 |
|
|
[256]
|
A Study on The Effect of Sic on Mechanical Properties of Carbon/Banana Peduncle Fiber Reinforced Epoxy Composites
|
|
2019 |
|
|
[257]
|
Effect of Steam Treatment on the Characteristics of Oil Palm Empty Fruit Bunch and Its Biocomposite
|
|
Indonesian Journal of Chemistry,
2019 |
|
|
[258]
|
Modified hemp fibers intended for fiber‐reinforced polymer composites used in structural applications—A review. I. Methods of modification
|
|
2019 |
|
|
[259]
|
Experimental Investigation on Natural Fibers Composite for Sustainable Development
|
|
2019 |
|
|
[260]
|
Experimental Investigation on Mechanical Joint of Lontar (Borassus Flabellifer) Fiber Reinforced Polyester Composites under Static Flexural Test
|
|
2019 |
|
|
[261]
|
Propuesta de aprovechamiento de la fibra de plátano en la región del Ariari Departamento del Meta
|
|
2019 |
|
|
[262]
|
Caracterización de un material compuesto de matriz poliéster reforzada con fibra de yute precargada mediante moldeo por compresión
|
|
2019 |
|
|
[263]
|
Textile: Substrates Modification by Novel Polymers
|
|
2019 |
|
|
[264]
|
Effect of Graphene Powder on Banyan Aerial Root Fibers Reinforced Epoxy Composites
|
|
2019 |
|
|
[265]
|
Effect of Agro-waste Microcoir Pith and Nano-alumina Reinforcement on Thermal Degradation and Dynamic Mechanical Behavior of Polyester Composites
|
|
2019 |
|
|
[266]
|
Preparation and studies of pigeon pea stalk/polypropylene composites with and without compatibilizer
|
|
2019 |
|
|
[267]
|
An Experimental Investigation on Tensile Properties of Hybrid BioPolyurethane Composite: Modeling and Optimization
|
|
2019 |
|
|
[268]
|
Characterization of cellulosic fibre from Phoenix pusilla leaves as potential reinforcement for polymeric composites
|
|
2019 |
|
|
[269]
|
Tribo-functional effects of double-crossed helix on surface finish, cutting friction and tool wear mechanisms during the milling process of natural fiber composites
|
|
2019 |
|
|
[270]
|
Natural Fibers as Sustainable and Renewable Resource for Development of Eco-friendly Composites: A Comprehensive Review
|
|
2019 |
|
|
[271]
|
Manufacture of Hybrid Natural/Synthetic Fiber Woven Textiles for Use in Technical Biocomposites with Maximum Biobased Content
|
|
2019 |
|
|
[272]
|
Mechanical Properties of Short Sisal Fiber Reinforced Polylactic Acid (PLA) Biocomposite Processed by Injection Molding
|
|
2019 |
|
|
[273]
|
Tailoring the Effective Properties of Typha Fiber Reinforced Polymer Composite via Alkali Treatment
|
|
2019 |
|
|
[274]
|
Hybridization of Hemp Fiber and Recycled-Carbon Fiber in Polypropylene Composites
|
|
2019 |
|
|
[275]
|
Mechanical evaluation of hybrid natural fibre–reinforced polymeric composites for automotive bumper beam: a review
|
|
2019 |
|
|
[276]
|
Effect of pineapple leaf (PALF), napier, and hemp fibres as filler on the scratch resistance of epoxy composites
|
|
2019 |
|
|
[277]
|
Water absorption behaviour on the mechanical properties of woven hybrid reinforced polyester composites
|
|
2019 |
|
|
[278]
|
Characterization and Properties of Oil Palm Empty Fruit Bunch Reinforced Polyvinyl Alcohol Thin Films
|
|
2019 |
|
|
[279]
|
Redesign a table arm for folding table using natural composite material and evaluate the strength of material
|
|
2019 |
|
|
[280]
|
Effect of processing parameters on tensile properties of recycled polypropylene based composites reinforced with jute fabrics
|
|
2019 |
|
|
[281]
|
A brief review of computational analysis and experimental models of composite materials for aerospace applications
|
|
2019 |
|
|
[282]
|
Hybridization of Bast Natural and Synthetic Fibers in Thermoplastic Composites
|
|
2019 |
|
|
[283]
|
Natural Fibers as Viable Sources for the Development of Structural, Semi-Structural, and Technological Materials–A Review
|
|
Advanced Materials Letters,
2019 |
|
|
[284]
|
Additive Manufacturing: A Novel Method for Developing an Acoustic Panel Made of Natural Fiber-Reinforced Composites with Enhanced Mechanical and Acoustical …
|
|
2019 |
|
|
[285]
|
Characterization and properties of cellulose microfibers from water hyacinth filled sago starch biocomposites
|
|
2019 |
|
|
[286]
|
A Study of Chemical Treatment of Natural Fibers and Its Effect on the Mechanical Properties of Developed Composites
|
|
2019 |
|
|
[287]
|
The effects of the temperature on the mechanical properties of natural yarns
|
|
2019 |
|
|
[288]
|
Development of Vinyl Ester and Reed Composite Material with Weight Fraction of 10% and Reinforcement at Different Orientations
|
|
2019 |
|
|
[289]
|
Tribological and dynamic mechanical analysis of bio-composites: A review
|
|
2019 |
|
|
[290]
|
Natural Rubber Composites Filled with Crop Residues as an Alternative to Vulcanizates with Common Fillers
|
|
2019 |
|
|
[291]
|
Mechanical properties of the Jute fibers-activated carbon filled reinforced polyester composites
|
|
2019 |
|
|
[292]
|
Effect of agglomerated zirconia-toughened mullite on the mechanical properties of giant cane fiber mat epoxy laminated composites
|
|
2019 |
|
|
[293]
|
Structural Analysis of Natural Fiber Reinforced Epoxy-Hybrid Composites
|
|
2019 |
|
|
[294]
|
Influence of Poly (vinyl butyral) Modification on the Mechanical and Thermal Properties of Kevlar Fiber Reinforced Novolac epoxy/multiwalled carbon nanotube …
|
|
2019 |
|
|
[295]
|
Mechanical Behaviour of Areca Nut, Sunn Hemp Natural Fibers and E-Glass Fibers Reinforced With Epoxy Composites
|
|
International Journal of Engineering and Advanced Technology,
2019 |
|
|
[296]
|
Optimization of Sulfuric Acid Concentration and Hydrolysis Time on Crystallinity of Nanocrystalline Cellulose: A Response Surface Methodology Study
|
|
2019 |
|
|
[297]
|
Effect of silanized sisal fiber on thermo-mechanical properties of reinforced epoxy composites
|
|
2019 |
|
|
[298]
|
Tensile Properties of Hybrid Woven Glass Fibre/PALF Reinforced Polymer Composite
|
|
2019 |
|
|
[299]
|
Processing of Green Composites
|
|
Green Composites,
2019 |
|
|
[300]
|
Characterization of natural fiber reinforced polymer composites
|
|
2019 |
|
|
[301]
|
Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens
|
|
2019 |
|
|
[302]
|
Fused deposition processing polycaprolactone of composites for biomedical applications
|
|
2019 |
|
|
[303]
|
Polymer Nanocomposites for Advanced Automobile Applications
|
|
2019 |
|
|
[304]
|
Insitu Self-Assembly of Bacterial Cellulose on Banana Fibers Extracted from Peels
|
|
2019 |
|
|
[305]
|
A review on Sterculia urens Roxb.: a boon to the livelihood for tribal people and industry
|
|
2019 |
|
|
[306]
|
Meta-analysis of Student Performance Assessment Using Fuzzy Logic
|
|
2019 |
|
|
[307]
|
Investigation on mechanical properties of polyurethane hybrid nanocomposite foams reinforced with roselle fibers and silica nanoparticles
|
|
2019 |
|
|
[308]
|
Study on Carbon, Glass, and Flax Hybrid Composites Using Experimental and Computational Techniques
|
|
2019 |
|
|
[309]
|
Effect of hemp fibre length on the properties of polypropylene composites
|
|
NULL
2019 |
|
|
[310]
|
Synergistic effect of hybrid Himalayan Nettle/Bauhinia-vahlii fibers on physico-mechanical and sliding wear properties of epoxy composites
|
|
2019 |
|
|
[311]
|
Natural fiber–reinforced composites: A review on material, manufacturing, and machinability
|
|
2019 |
|
|
[312]
|
The potential application of cereal straw as a bio-filler for elastomer composites
|
|
2019 |
|
|
[313]
|
A review on the properties of natural fibres and its bio-composites: Effect of alkali treatment
|
|
2019 |
|
|
[314]
|
Tensile strength of flax fabrics to be used as reinforcement in cement-based composites: experimental tests under different environmental exposures
|
|
2019 |
|
|
[315]
|
Physical and Thermal Properties of Novel Native Andean Natural Fibers
|
|
2019 |
|
|
[316]
|
PENGARUH FRAKSI VOLUME KOMPOSIT SERBUK CANGKANG KELAPA SAWIT/EPOKSI TERHADAP KEKERASAN DAN LAJU KEAUSAN
|
|
2019 |
|
|
[317]
|
Hybridization of Bast Natural Fibers and Synthetic Fibers in Thermoplastic Composites
|
|
2019 |
|
|
[318]
|
Fabrication and Experimental Investigation on Mechanical Properties for Different Stacking Sequence of Jute and Carbon Fiber Reinforced Epoxy Composite
|
|
2019 |
|
|
[319]
|
Bagasse sugarcane fibers as reinforcement agents for natural composites: description and polymer composite applications Fibras de bagazo de caña de …
|
|
2019 |
|
|
[320]
|
Toughness and Fracture Surface of Frame of Drone Based on Composite from Waste Materials
|
|
2019 |
|
|
[321]
|
KARAKTERISASI BIOKOMPOSIT BERBAHAN PATI TAPIOKA DAN CHITOSAN DIPERKUAT OLEH SERAT NANO BACTERIAL CELLULOSE YANG DIPERSIAPKAN …
|
|
2019 |
|
|
[322]
|
Impact, Hardness and Water Absorption Properties of Natural Fibres (Banana, Hemp and Sisal) Hybrid Composite Material
|
|
2019 |
|
|
[323]
|
Fabrication and characterization of ceramic fibers from preceramic polymers
|
|
2019 |
|
|
[324]
|
Mechanical evaluation of hybrid natural fibre–reinforced polymeric composites for automotive bumper beam: a review.
|
|
2019 |
|
|
[325]
|
Mechanical Properties of Short Sisal Fiber Reinforced Poly Lactic Acid (PLA) Processed by Injection Molding
|
|
2019 |
|
|
[326]
|
Additive manufacturing: a novel method for developing an acoustic panel made of natural fiber-reinforced composites with enhanced mechanical and …
|
|
2019 |
|
|
[327]
|
Natural fibers as viable sources for the development of structural, semi-structural and technological materials–A review
|
|
2019 |
|
|
[328]
|
Mechanical Properties of Composite Material Made of Natural Fibers
|
|
2019 |
|
|
[329]
|
Multifunctional Electronic Devices Based on Conductive Natural Materials
|
|
2019 |
|
|
[330]
|
Development of a multiaxial fabric out of untwisted flax slivers for high-performance composites
|
|
2018 |
|
|
[331]
|
Mohammad Jawaid4, Pradeep Shivanna1, 2, Yogesha Basavegowda1, 2 and Naheed Saba4 1Malnad College of Engineering, Hassan, Karnataka, India …
|
|
2018 |
|
|
[332]
|
Pengkajian kebolehtahanan struktur bat ping-pong yang diperbuat daripada kenaf komposit
|
|
2018 |
|
|
[333]
|
Encyclopedia of Polymer Applications, 3 Volume Set
|
|
2018 |
|
|
[334]
|
Physical and acoustic properties of petroleum and renewable based polyurethane foam filled with shorea leprosula
|
|
2018 |
|
|
[335]
|
Properties of Combretum dolichopetalum Fibre-High Density Polyethylene (HDPE) Composites
|
|
2018 |
|
|
[336]
|
ANALYSIS OF ENGINEERING PROPERTIES OF LATERITE
|
|
2018 |
|
|
[337]
|
Moldagem de compósitos de pead reciclado com tecido de fibras de juta e avaliação de propriedades de flexão
|
|
2018 |
|
|
[338]
|
Analysis of Engineering Properties of Laterite Blocks Reinforced with Pineapple Leaf Fibres
|
|
2018 |
|
|
[339]
|
ALKALINE TREATMENTS ON EFB FIBRE: THE EFFECT ON MECHANICAL-PHYSICAL PROPERTIES AND FIBRE-CEMENT HYDRATION RATE
|
|
Malaysian Construction Research Journal,
2018 |
|
|
[340]
|
Kompozyty polimerowe zawierające włókna roślinne-czynniki wpływające na wytrzymałość mechaniczną
|
|
2018 |
|
|
[341]
|
Properties of White Roselle (Hibiscus sabdariffa) Fibers
|
|
2018 |
|
|
[342]
|
Fabrication and Properties of Polypropylene and Kenaf Fiber Composite
|
|
IOP Conference Series: Materials Science and Engineering,
2018 |
|
|
[343]
|
Effect of Alfa Fiber Mechanical Separation on Dielectric Properties of Hybrid Unsaturated Polyester Composites
|
|
Polymer composites,
2018 |
|
|
[344]
|
Experimental and Analysis of Jute Fabric with Silk Fabric Reinforced Polymer Composites
|
|
2018 |
|
|
[345]
|
Effect of hygrothermal ageing on the hardness and drilling time of natural fiber composite material
|
|
2018 |
|
|
[346]
|
Evaluation of machining performance of pineapple filler based reinforced polymer composites using abrasive water jet machining process
|
|
IOP Conference Series: Materials Science and Engineering,
2018 |
|
|
[347]
|
Tensile and flexural properties of natural fiber reinforced polymer composites: A review
|
|
Journal of Reinforced Plastics and Composites,
2018 |
|
|
[348]
|
Influence of the delignification process on the properties of panels made with Guadua fibers and plant resin
|
|
Industrial Crops and Products,
2018 |
|
|
[349]
|
Effect of Various Chemical Treatments of Prosopis juliflora Fibers as Composite Reinforcement: Physicochemical, Thermal, Mechanical, and Morphological …
|
|
Journal of Natural Fibers,
2018 |
|
|
[350]
|
A comprehensive review of techniques for natural fibers as reinforcement in composites: Preparation, processing and characterization
|
|
2018 |
|
|
[351]
|
Effects of Fiber Size and Fiber Content on Mechanical and Physical Properties of Mengkuang Reinforced Thermoplastic Natural Rubber Composites
|
|
2018 |
|
|
[352]
|
Potential of natural/synthetic hybrid composites for aerospace applications
|
|
Sustainable Composites for Aerospace Applications,
2018 |
|
|
[353]
|
Vibration analysis of Hybrid fabrics reinforced polymer matrix curved composite beams
|
|
Composites: Mechanics, Computations, Applications: An International Journal,
2018 |
|
|
[354]
|
Mechanical Characterization of Areca husk-Coir fiber reinforced hybrid Composites
|
|
Materials Today: Proceedings,
2018 |
|
|
[355]
|
Obtaining and Optimization of Cellulose Pulp from Leaves of Agave tequilana Weber Var. Blue. Preparation of Handmade Craft Paper
|
|
Waste and Biomass Valorization,
2018 |
|
|
[356]
|
Effect of stacking sequence on properties of coconut leaf sheath/jute/E-glass reinforced phenol formaldehyde hybrid composites
|
|
Journal of Industrial Textiles,
2018 |
|
|
[357]
|
ANALISA SIFAT FISIK DAN MEKANIK DARI GREEN COMPOSITE MATERIAL DARI LIMBAH STYROFOAM, AMPAS TEBU DAN CANGKANG TELUR SEBAGAI …
|
|
2018 |
|
|
[358]
|
A review on synthesis and characterization of commercially available natural fibers: Part-I
|
|
Journal of Natural Fibers,
2018 |
|
|
[359]
|
Synthesis and characterization of cellulosic fiber from red banana peduncle as reinforcement for potential applications
|
|
Journal of Natural Fibers,
2018 |
|
|
[360]
|
The Hybrid Effect of Jute/Kenaf/E-Glass Woven Fabric Epoxy Composites for Medium Load Applications: Impact, Inter-Laminar Strength, and Failure Surface …
|
|
Journal of Natural Fibers,
2018 |
|
|
[361]
|
Fabrication of Glass/Jute/Epoxy Composite Based Industrial Safety Helmet
|
|
Materials Today: Proceedings,
2018 |
|
|
[362]
|
Characterization and properties of natural fiber polymer composites: A comprehensive review
|
|
Journal of Cleaner Production,
2018 |
|
|
[363]
|
Experimental determination of elastic modulus of elasticity and Poisson's coefficient of date palm tree fiber
|
|
Journal of Religion, Spirituality & Aging,
2018 |
|
|
[364]
|
Water-resistant hemp fiber-reinforced composites: In-situ surface protection by polyethylene film
|
|
Industrial Crops and Products,
2018 |
|
|
[365]
|
Modeling and Predicting the Mechanical Properties of Nano Clay Dispersed Natural Fiber Hybrid Intra-ply Woven Fabric Composite by Using Response Surface …
|
|
Advanced Manufacturing and Materials Science,
2018 |
|
|
[366]
|
Characterization of natural cellulosic fiber from bark of Albizia amara
|
|
Journal of Natural Fibers,
2018 |
|
|
[367]
|
Effect of untreated fiber loading on the thermal, mechanical, dielectric, and microwave absorption properties of polycaprolactone reinforced with oil palm empty fruit bunch biocomposites
|
|
Polymer composites,
2018 |
|
|
[368]
|
Development of a Batik Fiberglass Composite for Marine Applications Based on Water Absorption Testing
|
|
Engineering Applications for New Materials and Technologies,
2018 |
|
|
[369]
|
Tert-butyl catechol/alkaline-treated kenaf/jute polyethylene hybrid composites: impact on physico-mechanical, thermal and morphological properties
|
|
Polymer Bulletin,
2018 |
|
|
[370]
|
Study on characterization and physicochemical properties of new natural fiber from Phaseolus vulgaris
|
|
Journal of Natural Fibers,
2018 |
|
|
[371]
|
A comprehensive review on surface modification, structure interface and bonding mechanism of plant cellulose fiber reinforced polymer based composites
|
|
Composite Interfaces,
2018 |
|
|
[372]
|
Influence of Chemical Surface Modifications on Mechanical Properties of Combretum dolichopetalum Fibre-High Density Polyethylene (HDPE) Composites
|
|
Pakistan Journal of Scientific and Industrial Research Series A: Physical Sciences,
2018 |
|
|
[373]
|
Comparison of fibres properties of azadirachta indica and acacia arabica plant for lightweight composite applications
|
|
STRUCTURAL INTEGRITY AND LIFE,
2018 |
|
|
[374]
|
Natural Fibers for Sustainable Bio-Composites
|
|
2018 |
|
|
[375]
|
Funcionalizacion De Nanocelulosa Extraida De Estopa De Fique Mediante Su Modificacion Con Nanoparticulas De Plata.
|
|
2018 |
|
|
[376]
|
Toughness and Fracture Surface of Frame of Drone Based on Green Composite Materials
|
|
2018 |
|
|
[377]
|
VIBRATIONAL ANALYSIS OF HYBRID FABRIC-REINFORCED POLYMER MATRIX CURVED COMPOSITE BEAMS
|
|
2018 |
|
|
[378]
|
The potential of nanoclay modified Spartium junceum L. fibres used as reinforcement in PLA matrix composites for automotive applications
|
|
2018 |
|
|
[379]
|
COMPATIBILITY ASSESSMENT FOR PHYSICAL AND MECHANICAL PROPERTIES OF EMPTY FRUIT BUNCH CEMENT-BONDED FIBREBOARD
|
|
2018 |
|
|
[380]
|
Experiment on Morphological Characteristics and Mechanical Behaviour of Arecanut Husk Fibre (AHF)
|
|
2018 |
|
|
[381]
|
A comprehensive review of techniques for natural fibers as reinforcement in composites
|
|
2018 |
|
|
[382]
|
Mechanical Properties of Gamma-Irradiated Natural Fiber Reinforced Composites
|
|
2018 |
|
|
[383]
|
Studies on the degradation of jute blended cotton fabric in soil, water and ambient atmosphere
|
|
2018 |
|
|
[384]
|
Investigation on Flax Natural Fiber Reinforced Polymer Matrix Composites
|
|
International Journal of Engineering Research & Technology (IJERT),
2018 |
|
|
[385]
|
Investigation of Mechanical Properties of Natural Fibers–A Review
|
|
International Journal of Innovative Science and Research Technology,
2017 |
|
|
[386]
|
Feasibility of incorporating treated lignin and cellulose nanofiber in fiberboards made from corn stalk and rice straw
|
|
2017 |
|
|
[387]
|
Testing Methods for Composite Materials
|
|
2017 |
|
|
[388]
|
Review on Three-Dimensionally Emulated Fiber-Embedded Lactic Acid Polymer Composites: Opportunities in Engineering Sector
|
|
International Journal of Sustainable Development & World Ecology,
2017 |
|
|
[389]
|
Application of Antimicrobial Microcapsules on Agrotextiles
|
|
2017 |
|
|
[390]
|
Mechanical Properties of Phenol Formaldehyde Hybrid Composites Reinforced with Natural Cellulose Fibers
|
|
2017 |
|
|
[391]
|
Bacterial cellulose-assisted de-lignified wheat straw-PVA based bio-composites with novel characteristics
|
|
Carbohydrate Polymers,
2017 |
|
|
[392]
|
State-of-Art on Hybridization of Natural Fiber Reinforced Polymer Composites
|
|
2017 |
|
|
[393]
|
Tensile Property Evaluation of Sisal–Glass Fiber Reinforced Polymer Based Composites
|
|
International Journal of Composite Materials,
2017 |
|
|
[394]
|
Physicochemical Properties of New Cellulosic Fibers from Azadirachta indica Plant
|
|
Ironmaking & Steelmaking: Processes, products and Applications,
2017 |
|
|
[395]
|
Characterization of New Natural Cellulosic Fiber from Heteropogon Contortus Plant
|
|
International Journal of Food Sciences and Nutrition,
2017 |
|
|
[396]
|
A review on mode-I interlaminar fracture toughness of fibre reinforced composites
|
|
Journal of Physics: Conference Series,
2017 |
|
|
[397]
|
Study of a unidirectional flax reinforcement for biobased composite
|
|
Thèse,
2017 |
|
|
[398]
|
Hybrid bast fiber reinforced thermoset composites
|
|
Hybrid Polymer Composite Materials, Volume 3,
2017 |
|
|
[399]
|
Effect of tungsten carbide on mechanical and tribological properties of jute/sisal/E-glass fabrics reinforced natural rubber/epoxy composites
|
|
Journal of Industrial Textiles,
2017 |
|
|
[400]
|
MECHANICAL CHARACTERSTIZATION OF WOVEN PALMYRA/COIR FIBRE REINFORCED HYBRID POLYESTER COMPOSITES
|
|
2017 |
|
|
[401]
|
Rotational molding of self‐hybrid composites based on linear low‐density polyethylene and maple fibers
|
|
Polymer Composites,
2017 |
|
|
[402]
|
Effect of composition of fibers on properties of hybrid composites
|
|
International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME),
2017 |
|
|
[403]
|
Hybridization Effect of Sisal/Glass/Epoxy/Filler Based Woven Fabric Reinforced Composites
|
|
Experimental Techniques,
2017 |
|
|
[404]
|
Characterisation of Pulp and Paper Manufactured from Oil Palm Empty Fruit Bunches and Kenaf Fibres.
|
|
2017 |
|
|
[405]
|
Studies on hybridization effect of jute/kenaf/E-glass woven fabric epoxy composites for potential applications: Effect of laminate stacking sequences
|
|
Journal of Industrial Textiles,
2017 |
|
|
[406]
|
Physicochemical and Thermal Properties of Ceiba pentandra Bark Fiber
|
|
Journal of Biomaterials Science Polymer Edition,
2017 |
|
|
[407]
|
A review on synthesis and characterization of commercially available natural fibers: Part II
|
|
Studies in Higher Education,
2017 |
|
|
[408]
|
Characterization of natural cellulosic fiber from Epipremnum aureum stem
|
|
Journal of the Textile Institute,
2017 |
|
|
[409]
|
Investigating the impact of plant fibres in increasing the strength of concrete
|
|
International Journal of Applied Environmental Sciences (IJAES),
2017 |
|
|
[410]
|
Review on Mechanical properties and Fatigue life of E-Glass/Bamboo Fiber Reinforced Polymer Composites
|
|
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & MANAGEMENT,
2017 |
|
|
[411]
|
Effet de l'oxydation TEMPO des fibres de lin sur l'efficacité de greffage des agents de couplage silane
|
|
2017 |
|
|
[412]
|
Mechanical Properties of Composite Waste Material Based Styrofoam, Baggase and Eggshell Powder for Application of Drone Frames
|
|
IOP Conference Series: Earth and Environmental Science,
2017 |
|
|
[413]
|
Study of a unidirectional flax reinforcement for biocomposite
|
|
2017 |
|
|
[414]
|
Natural fiber textile composite engineering
|
|
2017 |
|
|
[415]
|
2. Tribological aspects of natural fiber composites
|
|
2017 |
|
|
[416]
|
Processing Techniques of Polymer Matrix Composites–A Review
|
|
International Journal of Engineering Research and General Science,
2016 |
|
|
[417]
|
Ocena primernosti bukove žagovine kot ojačitvene komponente pri pripravi termoplastičnih biokompozitov
|
|
2016 |
|
|
[418]
|
Enzymatic and Bacterial modifications of natural Biofibres for Synthesis of biocomposites
|
|
2016 |
|
|
[419]
|
Tree-D State of the Art Report
|
|
2016 |
|
|
[420]
|
Quantitative genetics of drought resistance in early maturing maize (Zea mays L.)
|
|
2015 |
|
|
[421]
|
Ground and Low-Lying Excited Electronic States of [3,3′] Bidiazirinylidene (C2N4)
|
|
The Journal of Physical …,
2010 |
|
|
[422]
|
Optimization Of Mechanical Properties Of Hybrid Biocomposite From Sterculia Setigera Delile Fibre And Pterocarpus Erinaceus Wood Dust Epoxy
|
|
|
|
|
[423]
|
Valorization of hemp fibers into biocomposites via one‐step pectin‐based green fabrication process
|
|
|
|
|
[424]
|
Atık Esaslı Fibriller Biyoçözünür Toprak Örtüsü
|
|
|
|
|
[425]
|
Pengaruh minyak zippo dari komposit epoksi dengan penguat serat jute terhadap kecepatan rambatan api dan residu
|
|
|
|
|
[426]
|
ATIK ESASLI FİBRİLLER BİYOÇÖZÜNÜR TOPRAK ÖRTÜSÜ
|
|
M UZUN, Z ÇİL
|
|
|
[427]
|
Resol–Vegetable Fibers Composites
|
|
|
|
|
[428]
|
INVITED SPEAKER 3 PROGRESS IN PLANT FIBER REINFORCED POLYMER COMPOSITES
|
|
|
|
|
[429]
|
Microstructural and Mechanical Characteristics of Lm 26 Al-Matrix Composite Reinforced with Sugar Palm Fibre Ash
|
|
|
|
|
[430]
|
Preparation and study of mechanical and thermal properties of polymeric composites of unsaturated and polyester cellulose fibers
|
|
|
|
|
[431]
|
A review of injection-molded natural fiber-reinforced polymer composites
|
|
|
|
|
[432]
|
Morphological, Structural and Thermal Properties
|
|
|
|
|
[433]
|
woven hybrid reinforced polyester composites
|
|
|
|
|
[434]
|
Articles in ITJEMAST V13 (13) 2022
|
|
|
|
|
[435]
|
Effect of Nano Graphene Fillers on Tensile and Hardness Behaviors of Waste Cow Tail Hair Polyester Bio-composites
|
|
|
|
|
[436]
|
Manufacturing and Testing of PAN Nano Fibres, Banana Epoxy Nanocomposite
|
|
|
|
|
[437]
|
Fabrication and characterization of Norfolk Pinetree leaves particulates filled High Density Polyethylene Composite
|
|
|
|
|