Definition of Increasing the Fibre Capturing Surface of Saw Teeth of Cotton Ginning Machine through Mathematic Modelling - World Journal of Mechanics

WJM > Vol.1 No.3, June 2011

Volume 1, Issue 3 (June 2011)

ISSN Print: 2160-049X ISSN Online: 2160-0503

Google-based Impact Factor: 1 Citations h5-index & Ranking

Definition of Increasing the Fibre Capturing Surface of Saw Teeth of Cotton Ginning Machine through Mathematic Modelling ()

HTML

Download as PDF (Size: 486KB) PP. 122-126

DOI: 10.4236/wjm.2011.13017 4,259 Downloads 8,896 Views Citations

Author(s)

Azizov Shuhrat Mamatovich, Karimov Abdusamat

Affiliation(s)

ABSTRACT

Theoretical and the experimental researches executed in Uzbekistan and abroad explored some ways of a substantiation of a rational profile of a tooth of a saw and its fibre capturing ability. Despite that, untill now, optimum parameters of a saw gin which provides high quality ginning without harming the quality of cotton fibre have not been found. Considering the stated above in the given job the influence of the changed form of saw teeth on fibre-capturing area is examined. The analytical formulas for the additional area promoting to double the fibre capture quantity by saw teeth are received.

KEYWORDS

Factor of Proportionality, Radius of a Saw, Fibre, Gin, Teeth, Linear Speed, New Profile

Share and Cite:

A. Mamatovich and K. Abdusamat, "Definition of Increasing the Fibre Capturing Surface of Saw Teeth of Cotton Ginning Machine through Mathematic Modelling," World Journal of Mechanics, Vol. 1 No. 3, 2011, pp. 122-126. doi: 10.4236/wjm.2011.13017.

Cited by

[1]	Calculation Energy of Efficiency New Ginning Machine
	Engineering, 2022

[2]	Statically Analysis of the Stress State of Saw Gins Consisting of 90, 100, 110, 120, 130 Saws
	Engineering, 2022

[3]	Calculation of Cost-Effectiveness of Molds Made of Aluminum, MDF (Medium Density Fiberboard) and Steel
	Engineering, 2022

[4]	BIR KAMERALI IKKI SILINDRLI JINDA TOLANING SHIKASTLANISHI BO'YICHA OPTIMAL MATEMATIK MODELL TANLASH ПОЛУЧЕНИЯ САМОЙ …
	O'ZBEKISTONDA …, 2022

[5]	KOLOSNIK PUANSON MODELINI CAD YORDAMIDA TAYYORLASH. ПОДГОТОВКА МОДЕЛИ ПУАНСОНА КОЛОСНИКА С ИСПОЛЬЗОВАНИЕМ CAD …
	… INNOVATSIYALAR VA ILMIY …, 2022

[6]	ЭНЕРГОЭФФЕКТИВНЫЙ МЕТОД МОДЕЛИРОВАНИЕ И ИЗГОТОВЛЕНИЕ НОВОГО ВЫСОКО ПРОИЗВОДИТЕЛЬНОГО ПРОФИЛЯ ЗУБА ПИЛЫ
	O'ZBEKISTONDA FANLARARO …, 2022

[7]	Analysis of Namangan 77 cotton in production line with different saw gins for short fiber yield
	2021

[8]	RESULTS OF THE EXIT OF AVERAGE LENGTH FIBER COTTON ON PRIMARY FACTORIES WITH DIFFERENT SAW GINS
	Universum: технические науки, 2021

[9]	THE CREATION OF ANIMATED ACTIONS BY MEANS OF MATHEMATICAL MODEL FOR THE TECHNOLOGICAL PROCESS
	2018

[10]	The Energy Effective Method of Modeling and Manufacturing of New Profile Teeth of Saw
	2017

[11]	Study of the Dynamics of Cotton Seeds Movement under the Influence of Air Flow
	J Textile Sci Eng, 2017

[12]	The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin
	2016

[13]	Theoretical Analysis of Gin Cylinder for Simulating Dual Saw Cylinder Chamber Gin for Increasing Wear Proof, Energy Efficient, Saving Resources
	World Journal of Engineering and Technology, 2015

[14]	Theoretical and Experimental Studies of the Effect of Inclined Scraper on Removal of Raw Cotton from Mesh Surface
	World Journal of Mechanics, 2014

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journals Menu

Home

About SCIRP

Service

Policies