Modeling and Simulation Study of Space Data Link Protocol ()
ABSTRACT
This research paper describes the design and implementation of the
Consultative Committee for Space Data Systems (CCSDS) standards REF
_Ref401069962 \r \h \* MERGEFORMAT [1] for Space Data Link Layer Protocol (SDLP).
The primer focus is the telecommand (TC) part of the standard. The
implementation of the standard was in the form of DLL functions using C++
programming language. The second objective of this paper was to use the DLL
functions with OMNeT++ simulating environment to create a simulator in order to
analyze the mean end-to-end Packet Delay, maximum achievable application layer
throughput for a given fixed link capacity and normalized protocol overhead,
defined as the total number of bytes transmitted on the link in a given period
of time (e.g. per second) divided by the number of bytes of application data
received at the application layer model data sink. In addition, the DLL was
also integrated with Ground Support Equipment Operating System (GSEOS), a
software system for space instruments and small spacecrafts especially suited
for low budget missions. The SDLP is designed for rapid test system design and high flexibility
for changing telemetry and command requirements. GSEOS can be seamlessly moved
from EM/FM development (bench testing) to flight operations. It features the
Python programming language as a configuration/scripting tool and can easily be
extended to accommodate custom hardware interfaces. This paper also shows the
results of the simulations and its analysis.
Share and Cite:
Hababeh, I. , Al-Sayyed, R. , Alqatawna, J. , Majdalawi, Y. and Nabelsi, M. (2014) Modeling and Simulation Study of Space Data Link Protocol.
International Journal of Communications, Network and System Sciences,
7, 440-452. doi:
10.4236/ijcns.2014.710045.