Measurements of the Thermophysical Properties of the API 5L X80 - Materials Sciences and Applications

MSA > Vol.5 No.8, June 2014

Materials Sciences and Applications

Volume 5, Issue 8 (June 2014)

ISSN Print: 2153-117X ISSN Online: 2153-1188

Google-based Impact Factor: 0.97 Citations

Measurements of the Thermophysical Properties of the API 5L X80 ()

HTML

Download as PDF (Size: 2271KB) PP. 617-627

DOI: 10.4236/msa.2014.58064 7,031 Downloads 9,532 Views Citations

Author(s)

Tiago de Sousa Antonino, Pablo Batista Guimarães, Roberto de Araújo Alécio, Yogendra Prasad Yadava, Ricardo Artur Sanguinetti Ferreira

Affiliation(s)

Federal Institute of Education, Science and Technology of Pernambuco, Recife, Brazil.
Federal Institute of Education, Science and Technology of Pernambuco, Recife, Brazil; Federal University of Pernambuco, Department of Mechanical Engineering, Recife, Brazil.
Federal University of Pernambuco, Department of Mechanical Engineering, Recife, Brazil.

ABSTRACT

The thermophysical properties of API 5L X80 steel were experimentally measured, in order to use these in computational models to determine the temperature field in welded joints. In this work, values of thermal expansion coefficient, specific heat, thermal diffusivity and thermal conductivity were experimentally obtained as a function of temperature. The thermal expansion coefficient was determined at temperatures of 20°C to 1200°C in a dilatometer DIL 402 PC. The specific heat was determined on a differential scanning calorimeter at temperatures between 300°C and 1200°C. The diffusivity and thermal conductivity were determined in the temperature range 100°C to 800°C in a 457 LFA diffusivimeter using laser flash technique. The thermal expansion coefficient remained approximately with constant value of 8.5 × 10^-6 K^-1 and suffered two falls reaching values -25 × 10^-6 K^-1 and -50 × 10^-6 K^-1 in the stages of heating and cooling respectively. It was observed for this material, minimum and maximum values of specific heat equal to 0.571 J/gK and 1.084 J/gK at temperatures of 300°C and 720°C, respectively. The behavior of thermal diffusivity and thermal conductivity in the temperature range 100°C to 800°C tends to decrease with increasing temperature. Based on the measured properties, computational modeling of the temperature field can be numerically obtained with better accuracy.

KEYWORDS

Thermophysical Properties, API 5L X80 Steel, Measurements

Share and Cite:

Antonino, T. , Guimarães, P. , Alécio, R. , Yadava, Y. and Ferreira, R. (2014) Measurements of the Thermophysical Properties of the API 5L X80. Materials Sciences and Applications, 5, 617-627. doi: 10.4236/msa.2014.58064.

Cited by

[1]	Investigate the Possibility of Temporary Natural Gas Transportation Line Blocking by Using Hydrate Formation for Repairs
	koh… - Iranian Chemical …, 2021

[2]	The structural integrity of high-strength welded pipeline steels: a review
	2020

[3]	Microstructure and mechanical properties of simulated weld heat affected zones in X80 linepipe steel
	2020

[4]	Advancements in Joining Armor Grade Steels
	2019

[5]	Structural integrity analysis of pipelines with interacting corrosion defects by multiphysics modeling
	2019

[6]	Modeling of the temperature field generated by the deposition of weld bead on a steel butt joint by FEM techniques and thermographic images.
	2018

[7]	Modeling of thermal cycles and microstructural analysis of pipeline steels processed by friction stir processing
	The International Journal of Advanced Manufacturing Technology, 2018

[8]	Parameter Optimization and Prediction Model of Induction Heating for Large-Diameter Pipe
	2018

[9]	Influence of heat input and radius to pipe thickness ratio on the residual stresses in circumferential arc welded pipes of API X46 steels
	International Journal of Pressure Vessels and Piping, 2017

[10]	Effect of friction stir welding on hydrogen content of ISO 3183 X80M steel
	Journal of Manufacturing Processes, 2016

[11]	Modelagem da distribuição de temperatura numa junta soldada do aço API 5L X80 com validação do modelo por imagens termográficas
	2016

[12]	DEVELOPMENT OF STRATEGIES TO REDUCE THE COMPUTATIONAL COST IN SIMULATIONS OF WELDING PROCESS
	23rd ABCM International Congress of Mechanical Engineering, 2015

[13]	Influence of Rolling Direction in Calculation of Residual Stress by Using DCP Method in Naval Welded Sheets
	2015

[14]	TEMPERATURE DISTRIBUTION MODELING OF A WELDED JOINT BY THE USE OF THERMOGRAPHIC IMAGES
	2015

[15]	ANÁLISE NUMÉRICA DA INFLUÊNCIA DA CORRENTE DE SOLDAGEM NO CAMPO DE TEMPERATURA GERADO PELA SOLDAGEM DE UMA JUNTA DE TOPO DO AÇO API 5L X80 SOLDADA PELO PROCESSO GTAW
	21º CBECIMAT - Congresso Brasileiro de Engenharia e Ciência dos Materiais, 2014

[16]	ANÁLISE NUMÉRICA DA INFLUÊNCIA DA CORRENTE DE SOLDAGEM NO CAMPO DE TEMPERATURA GERADO PELA SOLDAGEM DE UMA JUNTA …
	TS Antonino, RS Oliveira, ES Nascimento

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journals Menu

Home

About SCIRP

Service

Policies