Journal of Analytical Sciences, Methods and Instrumentation

Volume 3, Issue 1 (March 2013)

ISSN Print: 2164-2745   ISSN Online: 2164-2753

Google-based Impact Factor: 0.42  Citations  

Ultra Sensitive Determination and Preconcentration of Cd2+, Cu2+ and Pb2+ after Multi-Walled Carbon Nanotubes Adsorption

HTML  XML Download Download as PDF (Size: 238KB)  PP. 8-12  
DOI: 10.4236/jasmi.2013.31002    3,160 Downloads   5,999 Views  Citations

ABSTRACT

Multi-Walled carbon nanotubes are used as preconcentrating probes for the quantitative determination of trace cadmium, copper and lead in environmental and biological sample using graphite Furnace Atomic Absorption Spectrometry and inductively coupled Plasma Optical Emission spectrometry. The method is based on the electrostatic interactions of positively charged Cd+, Cu+ and Pb+ with the negatively charged multi-walled carbon nanotubes (MWCNTs) for the preconcentration and isolation of analytes from sample solutions. Effective preconcentration of trace cadmium, copper and lead was achieved in a pH range of 5 - 7, 5 - 7 and 4 - 7, respectively. The retained cadmium, copper and lead were efficiently eluted with 0.3 mol·L-1 HCl for graphite Furnace Atomic Absorption Spectrometry determination. The multi-walled carbon nanotubes packed micro-column exhibited fairly fast kinetics for the adsorption of cadmium, copper and lead, permitting the use of high sample flow rates up to at least 3 mL·min-1 for the flow injection on micro-column preconcentration without the loss of the retention efficiency. The detection limits (3σ) were 0.03, 0.01 and 0.5 ng·mL-1 for Cd, Cu and Pb, respectively. The relative standard deviation under optimum condition is less than 2.9% (n = 10). The developed method was successfully applied to the determination of trace Cd, Cu and Pb in a variety of environmental and biological samples.

Share and Cite:

A. Abdel-Lateef, R. Mohamed and H. Mahmoud, "Ultra Sensitive Determination and Preconcentration of Cd2+, Cu2+ and Pb2+ after Multi-Walled Carbon Nanotubes Adsorption," Journal of Analytical Sciences, Methods and Instrumentation, Vol. 3 No. 1, 2013, pp. 8-12. doi: 10.4236/jasmi.2013.31002.

Cited by

[1] Simultaneous recovery of Cu2+ and Pb2+ from metallurgical wastewater by two tandem columns fixed respectively with tetraethylenepentamine and phosphoric acid …
2019
[2] Multiwalled carbon nanotubes as solid sorbent in dispersive micro solid-phase extraction for the sequential determination of cadmium and lead in water samples
Microchemical Journal, 2016
[3] 氧化碳纳米管微柱固相萃取与氢化物原子荧光联用测定天然水中痕量 Hg (Ⅱ) 的研究
山西师范大学学报: 自然科学版, 2015
[4] Chronopotentiometric synthesis of quantum dots with efficient surface-derived near-infrared electrochemiluminescence for ultrasensitive microchip-based ion …
RSC Advances, 2014
[5] Solid-phase extraction with multiwalled carbon nanotubes prior to photochemical generation of cadmium coupled to high-resolution continuum source atomic …
Journal of Analytical Atomic Spectrometry, 2014
[6] Solid-phase extraction with multiwalled carbon nanotubes prior to photochemical generation of cadmium coupled to high-resolution continuum source atomic absorption spectrometry
Journal of Analytical Atomic Spectrometry?, 2014
[7] Chronopotentiometric synthesis of quantum dots with efficient surface-derived near-infrared electrochemiluminescence for ultrasensitive microchip-based ion-selective sensing
RSC Advances, 2014
[8] Recent advances in Mn-based oxides as anode materials for lithium ion batteries
RSC Advances, 2014

Copyright © 2023 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.