[1]
|
Improved MgO/P (VDF-TrFE) Piezoelectric Nanogenerator with Flexible Electrode
|
|
Arabian Journal for Science and Engineering,
2022 |
|
|
[2]
|
Simulation Studies on Bimorph and Unimorph PZT Piezoelectric Transducer for Energy Harvesting Application
|
|
Enabling Industry 4.0 through …,
2022 |
|
|
[3]
|
Hydrokinetic piezoelectric energy harvesting by wake induced vibration
|
|
2021 |
|
|
[4]
|
Grains level evaluation and performance enhancement for piezoelectric energy harvester
|
|
2021 |
|
|
[5]
|
Design of piezoelectric energy harvesting structures using ceramic and polymer materials
|
|
2021 |
|
|
[6]
|
Bandwidth broadening of piezoelectric energy harvesters using arrays of a proposed piezoelectric cantilever structure
|
|
Micromachines,
2021 |
|
|
[7]
|
Analytical Study of Impact-Driven Frequency Up-Conversion Piezoelectric Energy Harvester
|
|
2021 |
|
|
[8]
|
Energy Harvesting Characteristics of Electricity Generation System with Piezoelectric Element under Random Excitation
|
|
SCHOOL OF ENGINEERING,
2021 |
|
|
[9]
|
Experimental and numerical studies of a soft impact piezoelectric energy harvesting using an MR fluid
|
|
2020 |
|
|
[10]
|
Shape Optimization of Microfiber Composite Energy Harvesters
|
|
2020 |
|
|
[11]
|
Energy Harvesting of Traditional Cantilever-Based MEMS Piezoelectric Energy Harvester
|
|
2020 |
|
|
[12]
|
Multi-factors analysis on the energy harvesting performance of PEH under multiple-frequency excitation
|
|
2020 |
|
|
[13]
|
A study of a piezoelectric energy harvesting system using magnetorheological fluids
|
|
2020 |
|
|
[14]
|
Vibration Based Piezoelectric Energy Harvesting-A Review
|
|
2020 |
|
|
[15]
|
DEVELOPMENT OF NEW PIEZOELECTRIC GENERATOR WITH OPTIMUM POWER FLOW FOR ENERGY HARVESTING
|
|
THESIS,
2019 |
|
|
[16]
|
SMART NANOCOMPOSITES FOR ENERGY HARVESTING AND SENSING APPLICATIONS
|
|
2019 |
|
|
[17]
|
Flexible Piezoelectric Generators and Pulse Sensors Using Single-Crystalline III-N Thin Films
|
|
2019 |
|
|
[18]
|
Structural health monitoring of biocomposites, fibre-reinforced composites, and hybrid composite
|
|
2019 |
|
|
[19]
|
FlexiCheck: An Adaptive Checkpointing Architecture for Energy Harvesting Devices
|
|
2019 |
|
|
[20]
|
Output characteristics of thin-film flexible piezoelectric generators: A numerical and experimental investigation
|
|
2019 |
|
|
[21]
|
A Study of Nonlinear Piezoelectric Energy Harvester with Variable Damping using Thin Film MR Fluid
|
|
2019 |
|
|
[22]
|
Experimental Studies of Cantilever Type PEG with Proof Mass and Active Clamping
|
|
2019 |
|
|
[23]
|
Performance Optimization of a Proposed Piezoelectric Cantilever Energy Harvester Using Genetic Algorithm
|
|
2019 |
|
|
[24]
|
Design, Fabrication, and Testing of Piezoelectric Energy Harvesters
|
|
2018 |
|
|
[25]
|
Controlling the Frequency Response of a Cantilever-Based Energy Harvesters Using Split Piezoelectric Elements
|
|
2018 |
|
|
[26]
|
Demonstrating the effects of elastic support on power generation and storage capability of piezoelectric energy harvesting devices
|
|
Journal of Intelligent Material Systems and Structures,
2018 |
|
|
[27]
|
Исследование колебаний пьезоэлектрических структур в составе устройств накопления энергии
|
|
2018 |
|
|
[28]
|
Implementation of rain power generation using circular piezoelectric
|
|
AIP Conference Proceedings,
2018 |
|
|
[29]
|
The macro-fibre composite–bonded effect analysis on the micro-energy harvester performance and structural health–monitoring system of woven kenaf turbine blade …
|
|
Advances in Mechanical Engineering,
2018 |
|
|
[30]
|
The bonded macro fiber composite (MFC) and woven kenaf effect analyses on the micro energy harvester performance of kenaf plate using modal testing and Taguchi method
|
|
2017 |
|
|
[31]
|
Mechanical vibration using piezoelectric material
|
|
2017 |
|
|
[32]
|
A Versatile and Fully Instrumented Test Station for Piezoelectric Energy Harvesters
|
|
Measurement,
2017 |
|
|
[33]
|
The bonded macro fiber composite (MFC) and woven kenaf effect analyses on the micro energy harvester performance of kenaf plate using modal testing and Taguchi …
|
|
2017 |
|
|
[34]
|
The macro fiber composite (MFC) bonded effect analysis on the micro energy harvester performance and structural health monitoring system of woven kenaf turbine …
|
|
2017 |
|
|
[35]
|
Пьезоэлектрический преобразователь кантилеверного типа механической энергии в электрическую
|
|
2017 |
|
|
[36]
|
Electric power output maximization for piezoelectric energy harvester by optimizing resistive load
|
|
2016 |
|
|
[37]
|
Nanoscale Ferroelectrics and Multiferroics: Key Processing and Characterization Issues, and Nanoscale Effects, 2 Volumes
|
|
2016 |
|
|
[38]
|
Energy scavenging aspects of cantilever based MEMS piezoelectric pressure sensor
|
|
2016 |
|
|
[39]
|
Design and low cost fabrication of green vibration energy harvester
|
|
Sensors and Actuators A: Physical,
2016 |
|
|
[40]
|
Nanoscale Ferroelectrics and Multiferroics: Key Processing and Characterization Issues, and Nanoscale Effects
|
|
2016 |
|
|
[41]
|
Fabrication of One-Dimensional Ferroelectric Nano-and Microstructures by Different Spinning Techniques and Their Characterization
|
|
Nanoscale Ferroelectrics and Multiferroics: Key Processing and Characterization Issues, and Nanoscale Effects,
2016 |
|
|
[42]
|
Experimental study and analysis of unimorph piezoelectric energy harvester with different substrate thickness and different proof mass shapes
|
|
Microsystem Technologies,
2016 |
|
|
[43]
|
1923. The bonded macro fiber composite (MFC) and woven kenaf effect analyses on the micro energy harvester performance of kenaf plate using modal testing and Taguchi method.
|
|
Journal of Vibroengineering,
2016 |
|
|
[44]
|
Electric Power Output Maximization for Piezoelectric Energy Har-vester by Optimizing Resistive Load
|
|
2016 |
|
|
[45]
|
A novel bistable energy harvesting concept
|
|
Smart Materials and Structures,
2016 |
|
|
[46]
|
Performance Analysis of Diaphragm and Cantilever Based Mems Sensor for Environmental Applications
|
|
2016 |
|
|
[47]
|
AHMAD HAMDAN ARIFFIN
|
|
2015 |
|
|
[48]
|
Energy harvesting of cantilever with silicon tip mass based MEMS energy scavengers
|
|
2015 2nd International Conference on Electronics and Communication Systems (ICECS),
2015 |
|
|
[49]
|
An Approach for Current Producing Through PWS Method to Separate H2O2 from Sea Water
|
|
Journal of Network Communications and Emerging Technologies (JNCET) www. jncet. org,
2015 |
|
|
[50]
|
REAL-TIME CONTROL OF AN ELECTRODYNAMIC SHAKER
|
|
Thesis,
2015 |
|
|
[51]
|
Modeling and Analysis of Bimorph Piezoelectromagnetic Energy Harvester
|
|
Thesis,
2015 |
|
|
[52]
|
A Review of Vibration-Based Piezoelectric Energy Harvesters
|
|
DK Chakarborty, UK Joshi - ijesrt.com,
2014 |
|
|
[53]
|
Enhanced Multipath Approach for Prevention and Elimination of Black Hole Attack in Mobile Ad-Hoc Networks considering the Enhancement of Network Throughput
|
|
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY,
2014 |
|
|
[54]
|
Energetic Efficiency of Cantilever Type Piezoelectric Generators
|
|
2014 |
|
|
[55]
|
Simulation study on performance of MEMS piezoelectric energy harvester with optimized substrate to piezoelectric thickness ratio
|
|
Microsystem Technologies, Springer,
2014 |
|
|
[56]
|
Design and low cost fabrication of green vibration
|
|
2013 |
|
|
[57]
|
PZT length optimization of MEMS piezoelectric energy harvester with a non-traditional cross section: simulation study
|
|
Microsystem Technologies, Springer,
2013 |
|
|